대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩371,187.20
재고있음
- 12 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩371,187.20 |
| 5 + | ₩305,481.20 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 239-6814
- 제조업체:
- RS PRO
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | RS PRO | |
| Length | 50m | |
| 모두 선택 | ||
|---|---|---|
브랜드 RS PRO | ||
Length 50m | ||
해당 안됨
- COO (Country of Origin):
- GB
RS PRO Rope Pull Kit, For Use With All Rope Pull Switches
This rope pull kit from RS PRO contains everything you need to install an emergency stop switch in both hazardous and general areas. Designed for use with all rope pull switches, these are typically found on assembly lines and conveyor belts in manufacturing plants, for example.
The connection kit includes 50 metres of rope, which is more than enough to shut down machinery from a safe distance in an emergency. You can also cut the rope to whatever length you need. This complete kit includes two thimbles, collar clamps, a stainless steel tensioner and M6 eyebolts to support the wire at roughly 2- to 3-metre intervals. 'D' shackles are also supplied, which are used to secure either end of the grab wire to the safety switch.
This rope kit is part of the reliable RS PRO range, which means it's been exhaustively tested for durability and consistency.
The connection kit includes 50 metres of rope, which is more than enough to shut down machinery from a safe distance in an emergency. You can also cut the rope to whatever length you need. This complete kit includes two thimbles, collar clamps, a stainless steel tensioner and M6 eyebolts to support the wire at roughly 2- to 3-metre intervals. 'D' shackles are also supplied, which are used to secure either end of the grab wire to the safety switch.
This rope kit is part of the reliable RS PRO range, which means it's been exhaustively tested for durability and consistency.
Features and Benefits
• Rope pull kit
• For use with all rope pull switches
• Collar grab wire clamp
• Rope length of 50 m
• Kit contains all necessary fittings required, including M6 eyebolts with locking nuts, 2 thimbles, collar clamps, 'D' shackles and cable
• Multi-strand, galvanised steel cable with PVC coating
• Compliant with ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards
• For use with all rope pull switches
• Collar grab wire clamp
• Rope length of 50 m
• Kit contains all necessary fittings required, including M6 eyebolts with locking nuts, 2 thimbles, collar clamps, 'D' shackles and cable
• Multi-strand, galvanised steel cable with PVC coating
• Compliant with ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
