대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩190,143.20
재고있음
- 53 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩190,143.20 |
| 5 + | ₩156,491.20 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 239-6779
- 제조업체:
- RS PRO
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | RS PRO | |
| Length | 15m | |
| 모두 선택 | ||
|---|---|---|
브랜드 RS PRO | ||
Length 15m | ||
- COO (Country of Origin):
- GB
RS PRO Rope Pull Kit, For Use With All Rope Pull Switches
This rope kit from RS PRO is ideal for installing emergency stop switches in hazardous areas. It can also be used to fit a rope pull switch in general manufacturing environments, for example on assembly lines.
The kit contains all the fittings required to install any kind of pull switch, including a stainless steel tensioner, two thimbles, collar clamps and 'D' shackles for securing either end of the grab wire to the safety switch. The rope consists of a multi-strand, galvanised steel cable with PVC coating, so it's incredibly strong.
You get 15 metres of rope with this kit, which can be cut to whatever length you need. M6 eyebolts with locking nuts are also supplied, which help support the wire at two to three-metre intervals. This product has the RS PRO seal of approval, so you can be assured of its durability and consistency.
The kit contains all the fittings required to install any kind of pull switch, including a stainless steel tensioner, two thimbles, collar clamps and 'D' shackles for securing either end of the grab wire to the safety switch. The rope consists of a multi-strand, galvanised steel cable with PVC coating, so it's incredibly strong.
You get 15 metres of rope with this kit, which can be cut to whatever length you need. M6 eyebolts with locking nuts are also supplied, which help support the wire at two to three-metre intervals. This product has the RS PRO seal of approval, so you can be assured of its durability and consistency.
Features and Benefits
• Rope pull kit
• For use with all rope pull switches
• Collar grab wire clamp
• Rope length of 15 m
• Kit contains all necessary fittings required, including M6 eyebolts with locking nuts, 2 thimbles, collar clamps, 'D' shackles and cable
• Multi-strand, galvanised steel cable with PVC coating
• Compliant with ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards
• RoHS (Restriction of Hazardous Substances) compliant
• For use with all rope pull switches
• Collar grab wire clamp
• Rope length of 15 m
• Kit contains all necessary fittings required, including M6 eyebolts with locking nuts, 2 thimbles, collar clamps, 'D' shackles and cable
• Multi-strand, galvanised steel cable with PVC coating
• Compliant with ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards
• RoHS (Restriction of Hazardous Substances) compliant
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.