대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩220,110.40
재고있음
- 55 개 단위 배송 준비 완료
- 추가로 2026년 1월 22일 부터 1 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩220,110.40 |
| 5 + | ₩181,156.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 239-6791
- 제조업체:
- RS PRO
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | RS PRO | |
| Length | 30m | |
| 모두 선택 | ||
|---|---|---|
브랜드 RS PRO | ||
Length 30m | ||
- COO (Country of Origin):
- GB
RS PRO Rope Pull Kit, For Use With All Rope Pull Switches
Use this rope pull kit from RS PRO to install a rope pull switch on your assembly line or an emergency stop switch in a hazardous area. The kit includes all the fittings and components you'll need to complete this job, which is an essential safety measure in many industrial environments.
The kit includes a full 30 metres of rope, meaning you can be sure that machinery will be shut down from a safe distance in the event of an emergency. It can also be cut to whatever length you need.
This connection kit is suitable for all rope pull switches and includes collar clamps, two thimbles, a stainless steel tensioner and M6 eyebolts with locking nuts to support the wire at intervals of 2 to 3 m. There are also 'D' shackles, which you'll need for securing each end of the grab wire to the safety switch.
The kit includes a full 30 metres of rope, meaning you can be sure that machinery will be shut down from a safe distance in the event of an emergency. It can also be cut to whatever length you need.
This connection kit is suitable for all rope pull switches and includes collar clamps, two thimbles, a stainless steel tensioner and M6 eyebolts with locking nuts to support the wire at intervals of 2 to 3 m. There are also 'D' shackles, which you'll need for securing each end of the grab wire to the safety switch.
Features and Benefits
• Rope pull kit
• For use with all rope pull switches
• Collar grab wire clamp
• Rope length of 30 m
• Kit contains all necessary fittings required, including M6 eyebolts with locking nuts, 2 thimbles, collar clamps, 'D' shackles and cable
• Multi-strand, galvanised steel cable with PVC coating
• Compliant with ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards
• RoHS (Restriction of Hazardous Substances) compliant
• For use with all rope pull switches
• Collar grab wire clamp
• Rope length of 30 m
• Kit contains all necessary fittings required, including M6 eyebolts with locking nuts, 2 thimbles, collar clamps, 'D' shackles and cable
• Multi-strand, galvanised steel cable with PVC coating
• Compliant with ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards
• RoHS (Restriction of Hazardous Substances) compliant
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
