Honeywell Technologies HSCDRRN010MDAA3 Pressure SensorBoard 8 DIP

RS 제품 번호:: 211-9923
제조사 부품 번호:: HSCDRRN010MDAA3
제조업체:: Honeywell

Honeywell Technologies HSCDRRN010MDAA3 Pressure SensorBoard 8 DIP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 unit)*

₩99,360.00

추가로 2026년 9월 28일 부터 58 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 12	₩99,360.00
13 - 24	₩97,180.00
25 +	₩95,080.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 211-9923
제조사 부품 번호:: HSCDRRN010MDAA3
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Sensor Type	Piezoresistive Pressure Sensor
	Product Type	Pressure Sensor
	Maximum Overload Pressure	75kPa
	Mount Type	Board
	Package Type	DIP
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	1 kPa
	Port Type	Dual Radial Barbed
	Accuracy	±0.25 %
	Maximum Supply Voltage	5V
	Maximum Operating Temperature	+85°C
	Height	13.75mm
	Length	10mm
	Standards/Approvals	ISO 9001
	Series	HSC
	Width	13.3mm
	Minimum Operating Pressure	-10mbar
	Minimum Operating Temperature	-20°C
	Automotive Standard	ISO 9001

	모두 선택
	브랜드 Honeywell
	Sensor Type Piezoresistive Pressure Sensor
	Product Type Pressure Sensor
	Maximum Overload Pressure 75kPa
	Mount Type Board
	Package Type DIP
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 1 kPa
	Port Type Dual Radial Barbed
	Accuracy ±0.25 %
	Maximum Supply Voltage 5V
	Maximum Operating Temperature +85°C
	Height 13.75mm
	Length 10mm
	Standards/Approvals ISO 9001
	Series HSC
	Width 13.3mm
	Minimum Operating Pressure -10mbar
	Minimum Operating Temperature -20°C
	Automotive Standard ISO 9001

Datasheet - HSCDRRN010MDAA3

Honeywell HSC Series Differential Pressure Sensor, ±0.25% Accuracy, 3.3V Minimum Supply Voltage - HSCDRRN010MDAA3

This differential pressure sensor measures pressure difference between two ports and provides a ratiometric analogue or 14‑bit digital output for use with low‑voltage systems. It is intended for non‑corrosive, non‑ionic gases and is calibrated and temperature‑compensated for accurate readings across its compensated temperature range. The device is board‑mountable and available with dual radial barbed ports in a DIP package for straightforward PCB integration.

Features and Benefits:

• ±0.25%FSS accuracy reduces software correction needs
• Operates from 3.3V to 5V for low‑voltage designs
• Calibrated and compensated for temperature stability
• Fast update rate supporting up to 2kHz digital output
• High overload protection up to 75kPa improves robustness
• Operates from -20°C to 85°C for industrial conditions

Applications

• Used for ventilator and respiratory flow monitoring
• Suitable for HVAC filter clog detection systems
• Ideal for gas flow instrumentation and calibration rigs
• Used with oxygen concentrators and anaesthesia machines
• Can be used for barometry and indoor Air quality monitoring

What media may be applied to the ports?

The sensor is for non‑corrosive, non‑ionic gases, liquid‑media options exist for Port1 only on selected ranges and require compatible, particulate‑free fluids.

How is the sensor protected during solder assembly?

It meets IPC/JEDEC J‑STD‑020E moisture sensitivity level 1 allowing standard reflow without lengthy pre‑bake when handled per floor‑life guidance.

What digital interfaces are available and what resolution do they provide?

Digital outputs include I²C or SPI‑compatible formats with a minimum 12‑bit sensor resolution and up to 14‑bit digital output.

How does the device behave after power‑up?

Start‑up time to data‑ready is typically 3 MS for digital versions and up to 5 MS for analogue versions.

What mechanical mounting and port arrangements are offered?

The board‑mount package supports DIP pin mounting and variants include dual radial barbed port options for simple tubing connection.