Honeywell Technologies HSCDRRN010MD2A3 Pressure SensorBoard 8 DIP

RS 제품 번호:: 226-9666
제조사 부품 번호:: HSCDRRN010MD2A3
제조업체:: Honeywell

Honeywell Technologies HSCDRRN010MD2A3 Pressure SensorBoard 8 DIP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 unit)*

₩104,480.00

추가로 2026년 9월 28일 부터 55 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 9	₩104,480.00
10 - 24	₩102,600.00
25 - 49	₩100,740.00
50 +	₩98,940.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 226-9666
제조사 부품 번호:: HSCDRRN010MD2A3
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Sensor Type	Piezoresistive Pressure Sensor
	Product Type	Pressure Sensor
	Maximum Overload Pressure	75kPa
	Mount Type	Board
	Package Type	DIP
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	1 kPa
	Maximum Supply Voltage	5V
	Accuracy	±0.25 %
	Port Type	Dual Radial Barbed
	Maximum Operating Temperature	+85°C
	Height	13.75mm
	Length	10mm
	Standards/Approvals	ISO 9001
	Width	13.3mm
	Series	HSC
	Minimum Operating Pressure	-10mbar
	Minimum Operating Temperature	-20°C
	Automotive Standard	ISO 9001

	모두 선택
	브랜드 Honeywell
	Sensor Type Piezoresistive Pressure Sensor
	Product Type Pressure Sensor
	Maximum Overload Pressure 75kPa
	Mount Type Board
	Package Type DIP
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 1 kPa
	Maximum Supply Voltage 5V
	Accuracy ±0.25 %
	Port Type Dual Radial Barbed
	Maximum Operating Temperature +85°C
	Height 13.75mm
	Length 10mm
	Standards/Approvals ISO 9001
	Width 13.3mm
	Series HSC
	Minimum Operating Pressure -10mbar
	Minimum Operating Temperature -20°C
	Automotive Standard ISO 9001

Datasheet - HSCDRRN010MD2A3

Honeywell HSC Series Pressure Sensor, ±0.25% Accuracy, Board Mount - HSCDRRN010MD2A3

This pressure sensor is a piezoresistive device designed to provide precise pressure measurement for board-mounted applications in industrial and automotive contexts. Calibrated and temperature‑compensated on-board, it offers ratiometric analogue or digital outputs for reading absolute, gauge or differential pressure across its full‑scale span. The sensor is intended for use with non‑corrosive, non‑ionic gases and, for selected ranges, compatible non‑corrosive, non‑ionic liquids on Port 1.

Features and Benefits:

• ±0.25% accuracy pressure sensor delivers tight measurement tolerance
• Low-power operation minimises system energy consumption
• 75 kPa overload pressure sensor tolerates high transient loads
• Dual radial barbed port sensor enables differential measurements
• Low-pressure sensor -10 mbar to 1 kPa supports ultra-low detection
• Automotive ISO 9001 pressure sensor manufactured to quality standard

Applications

• Suitable for airflow monitoring in medical respiratory devices
• Ideal for HVAC filter clog detection and VAV control systems
• Used for gas flow instrumentation and chromatography analysers
• Can be used in automotive pressure measurement meeting ISO 9001 processes
• Suitable for battery‑powered portable analysers requiring low power draw

What supply voltages will the device operate from?

It operates from a single 3.3V or 5.0V supply and is ratiometric to supply voltage.

How quickly does the sensor provide calibrated outputs?

Calibrated analogue outputs update at approximately 1 kHz while digital outputs update at about 2 kHz.

What temperature range can it withstand during operation?

The device functions across an operating range from -20 to 85°C with a compensated span defined for typical use.

Which media are compatible with the wetted materials?

It is intended for non-corrosive, non-ionic gases, liquid media options apply only above specified pressure ranges and must be non-ionic.

How is orientation sensitivity managed for low ranges?

Orientation effects are quantified, ultra-low ranges exhibit measurable sensitivity and should be considered during installation.