STMicroelectronics Industrial digital output expansion board based on IPS1025H-32 for STM32 Nucleo Solid State Relay

본 제품군 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩75,576.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 5 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 1₩75,576.00
2 - 2₩74,053.20
3 +₩72,586.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
250-0216
제조사 부품 번호:
X-NUCLEO-OUT06A1
제조업체:
STMicroelectronics
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

STMicroelectronics

Power Management Function

Solid State Relay

For Use With

IPS1025H-32

Kit Classification

Expansion Board

Kit Name

Industrial digital output expansion board based on IPS1025H-32 for STM32 Nucleo

The STMicroelectronics industrial digital output expansion board for STM32 Nucleo , that provides a powerful and flexible environment for the evaluation of the driving and diagnostic capabilities of the IPS1025H 32 single high side smart power solid state relay, in a digital output module connected to 5.7 A industrial loads. It interfaces with the microcontroller on the STM32 Nucleo via 5 kV optocouplers driven by GPIO pins and Arduino UNO R3 connectors. This expansion board can be connected to either a NUCLEO F401RE or NUCLEOG431RB development board. It is also possible to evaluate a system composed by up to four stacked X NUCLEOOUT06A1 expansion boards.

Application board operating range is 8 to 33 V

Extended voltage operating range J3 open up to 60 V

Green LED for output on or off status

Red LEDs for overload and overheating diagnostics

5 kV galvanic isolation

Supply rail reverse polarity protection

Equipped with Arduino UNO R3 connectors

관련된 링크들