STMicroelectronics Industrial digital output expansion board based on IPS1025H for STM32 Nucleo Solid State Relay for

본 제품군 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩75,576.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 3 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 1₩75,576.00
2 - 2₩74,053.20
3 +₩72,586.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
250-0214
제조사 부품 번호:
X-NUCLEO-OUT05A1
제조업체:
STMicroelectronics
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

STMicroelectronics

Power Management Function

Solid State Relay

For Use With

IPS1025H

Kit Classification

Expansion Board

Kit Name

Industrial digital output expansion board based on IPS1025H for STM32 Nucleo

The STMicroelectronics industrial digital output expansion board for STM32 Nucleo , that provides a powerful and flexible environment for the evaluation of the driving and diagnostic capabilities of the IPS1025H single high side smart power solid state relay, in a digital output module connected to 2.5 A industrial loads. It interfaces with the microcontroller on the STM32 Nucleo via 5 kV optocouplers driven by GPIO pins and Arduino R3 connectors. This expansion board can be connected to either a NUCLEO F401RE or a NUCLEOG431RB development board. It is also possible to evaluate a system composed of up to four stacked X NUCLEOOUT05A1 expansion boards.

Application board operating range is 8 to 33 V
Extended voltage operating range J3 open up to 60 V
Green LED for output on or off status
Red LEDs for overload and overheating diagnostics
5 kV galvanic isolation
Supply rail reverse polarity protection
Equipped with Arduino UNO R3 connectors

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들