Phoenix Contact EMG Signal Conditioning DIN Rail, 2942124

모든 Potentiometers 열람하기

Subtotal (1 unit)*

₩261,180.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 11월 02일 부터 17 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩261,180.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
410-4724
Distrelec 제품 번호:
304-10-464
제조사 부품 번호:
2942124
제조업체:
Phoenix Contact
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Phoenix Contact

Product Type

Signal Conditioning

Mount Type

DIN Rail

Minimum Operating Temperature

0°C

Maximum Operating Temperature

40°C

Standards/Approvals

GOST

Series

EMG

COO (Country of Origin):
DE

Phoenix Contact Potentiometer, 10kΩ Resistance Value, 0.5W Current Capacity - EMG 30-SP-10K LIN - 2942124


This Phoenix Contact potentiometer is a variable resistor that regulates the current flowing through a circuit. It picks up an input voltage and transfers it, controlling the amount of voltage by the position of the sliding contact wiper. Manually adjust the wiper using the central rotary knob to easily GET the level you need.

The unit's Compact dimensions of 30 (W) x 75 (H) x 68mm (D) make it easy to fit alongside other control modules in your setup. It mounts to a DIN rail assembly via the M3 threaded screw terminals to keep it securely fixed in place. With an operating temperature range between 0°C and +40°C, it's designed for use in moderate conditions.

Use this device to provide reliable electrical resistance to motor speed-controlled devices such as safety doors. Its converting signal conditioner function strengthens a signal transmission for industrial amplification or filtering out electrical noise.

• Robust, fibre-reinforced polycarbonate housing material resists shattering or snapping when subjected to impact

• Green housing for easy identification of your devices on a DIN rail

• Lightweight 53.65g construction puts little strain on its mount

• 10 kΩ resistance level with a ±20% tolerance for a wide load resistance range

EMG 30-SP - setpoint Value potentiometer


The setpoint Value module enables setpoint Values to be defined via standard potentiometers

DIN rail assembly

관련된 링크들