Parker Pneumatic Timer 8 bar max
- RS 제품 번호:
- 410-488
- 제조사 부품 번호:
- PRT-C10
- 제조업체:
- Parker
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩420,048.40
재고있음
- 38 개 단위 배송 준비 완료
- 추가로 2026년 4월 17일 부터 13 개 단위 배송
- 추가로 2026년 7월 24일 부터 5 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩420,048.40 |
| 5 + | ₩345,694.40 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 410-488
- 제조사 부품 번호:
- PRT-C10
- 제조업체:
- Parker
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Parker | |
| Product Type | Pneumatic Timer | |
| Hazardous Area Certification | EN 50019 dated March 1977 (NFC 23519 dated May 1982), EExe ll T4, Conforming to certificate LCIE 866115X | |
| Mount Type | Surface, Flush, DIN Rail, Clip | |
| Minimum Operating Pressure | 3bar | |
| Maximum Operating Pressure | 8 bar | |
| Minimum Operating Temperature | -15°C | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | EN 50019 dated March 1977 (NFC 23519 dated May 1982), EN 50014 dated March 1977 (NFC 23514 dated May 1982) | |
| 모두 선택 | ||
|---|---|---|
브랜드 Parker | ||
Product Type Pneumatic Timer | ||
Hazardous Area Certification EN 50019 dated March 1977 (NFC 23519 dated May 1982), EExe ll T4, Conforming to certificate LCIE 866115X | ||
Mount Type Surface, Flush, DIN Rail, Clip | ||
Minimum Operating Pressure 3bar | ||
Maximum Operating Pressure 8 bar | ||
Minimum Operating Temperature -15°C | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals EN 50019 dated March 1977 (NFC 23519 dated May 1982), EN 50014 dated March 1977 (NFC 23514 dated May 1982) | ||
Parker Pneumatic Timer
The Parker PRT series pneumatic time delay relay requires operating pressure ranging between 3bar and 8bar. This OFF delay timer has a timing range from 0.1 seconds to 30 seconds. This timer has maintained input signal during an adjustable time after which a regenerated output appears. It is consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.
Note:
All the logic units require mounting on a separate 2 or 3 port base, available separately. Logic units have an input (green) and output (red) pressure indicator to show the state of the respective signal. Units are supplied with two captive screws for mounting on all types of base and sealing O-rings are in the bottom of each unit.
Features and Benefits
Long life expectancy
Polyamide body material
2 or 3-Port Subbase mount
Response time is 2 millisecond to 3 millisecond
Operating temperature ranging between -15°C and 60°C
Very reliable
Certifications
ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007
관련된 링크들
- Parker Pneumatic Timer 8 bar max
- Crouzet Pneumatic Timer Timer Relay 8 bar max
- Crouzet Pneumatic Timer 8 bar max
- Norgren Pneumatic Timer 10 bar max
- Festo Pneumatic Timer 6 bar max
- Festo Pneumatic Timer
- Parker PLL series 8 bar Pneumatic Logic Controller with AND function
- Parker PLK series 8 bar Pneumatic Logic Controller with OR function