제조사부품번호

Festo G3/8 in Lubricator 12 bar, MS Series

RS 제품 번호:: 793-205
제조사 부품 번호:: MS4-LOE-AGC-R
제조업체:: Festo

Festo G3/8 in Lubricator 12 bar, MS Series

Subtotal (1 unit)*

₩155,924.00

추가로 2026년 11월 09일 부터 2 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩155,924.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 793-205
제조사 부품 번호:: MS4-LOE-AGC-R
제조업체:: Festo

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Festo
	Port Size	G3/8 in
	Product Type	Lubricator
	Connection Thread Standard	G
	Series	MS
	Oil Capacity	30cm³
	Maximum Operating Pressure	12 bar
	Oil Feed Type	Oil Mist Lubricator
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	ISO 8573-1:2010, RoHS
	Bowl Material	Polycarbonate

	모두 선택
	브랜드 Festo
	Port Size G3/8 in
	Product Type Lubricator
	Connection Thread Standard G
	Series MS
	Oil Capacity 30cm³
	Maximum Operating Pressure 12 bar
	Oil Feed Type Oil Mist Lubricator
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 60°C
	Standards/Approvals ISO 8573-1:2010, RoHS
	Bowl Material Polycarbonate

COO (Country of Origin):: HU

Festo Series MS Lubricator, 30cm³ Oil Capacity, 12 bar Maximum Operating Pressure - MS4-LOE-AGC-R, Numeric Part Number: 8232827

This lubricator supplies a controlled oil mist into compressed Air lines to maintain moving pneumatic components. It is intended for vertical installation with minimal tilt and is compatible with compressed Air specified to ISO 8573-1:2010. The unit accepts G-thread connections and is suitable for environments with moderate corrosion stress, operating across typical ambient and media temperatures.

Features and Benefits:

• 0.1 MPa to 1.2 MPa operating pressure range for flexible system use
• 30 cm³ oil reservoir for prolonged service intervals
• G3/8 pneumatic ports for standard G-thread connections
• Polycarbonate bowl with plastic guard for Visual oil level monitoring
• NBR Seals and die-cast aluminium body for Durable component life

Applications

• Suitable for lubricating pneumatic actuators and cylinders
• Ideal for Air preparation units in assembly stations
• Used with inert gas supplies in controlled automation lines
• Can be used for lubrication in moderate-corrosion workshop areas

What mounting orientation is required for correct operation?

It must be mounted vertically within ±5° to ensure proportional mist delivery.

What oil viscosity is recommended for the lubricator?

Use oil with ISO VG32 viscosity to achieve intended feed behaviour.

What are the approved media and cleanliness standard?

The device is for compressed Air conforming to ISO 8573-1:2010 and inert gases.

How does the unit indicate corrosion resistance level?

Corrosion resistance is classified as CRC2, indicating moderate corrosion stress tolerance.