SMC Pneumatic Guided Cylinder - MGPM40TF-175Z 40mm Bore, MGPM Series, 175 mm Double Acting Acting

Subtotal (1 unit)*

₩989,980.00

Add to Basket
수량 선택 또는 입력
제조사가 재고 비축중
  • 2026년 12월 07일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩989,980.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
369-074
제조사 부품 번호:
MGPM40TF-175Z
제조업체:
SMC
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SMC

Product Type

Pneumatic Guided Cylinder

Bore Diameter

40mm

Series

MGPM

Action Type

Double Acting

Mount Type

Bottom, Top Mount, Side

Maximum Operating Pressure

1 Mpa

Cushioning Type

Rubber Cushioning at Both Ends

Body Material

Aluminium Alloy

Guide Type

Slide Bearing

Minimum Operating Temperature

-10°C

Maximum Piston Speed

500mm/s

Piston Rod Thread Standard

G

Rod Type

Single

Maximum Operating Temperature

60°C

Weight

4.33kg

Standards/Approvals

RoHS

Stroke Length

175mm

Model Number

MGPM40TF-175Z

SMC MGPM Series Compact Guide Cylinder, 40mm Bore size, 175mm Stroke Length - MGPM40TF-175Z


This Compact guide cylinder is a pneumatic sliding actuator designed for guided linear motion in automated assemblies. It provides controlled bidirectional force with integrated guiding elements and is intended for installations requiring constrained lateral movement and precise actuation in industrial environments.

Features and Benefits:


• 40mm bore delivers consistent actuation force for repeatable cycles
• 175mm stroke enables extended travel for broader motion tasks
• Double-acting operation allows controlled push and pull movement
• Rubber bumper cushioning reduces end-impact noise and wear
• Slide bearing guide offers smooth lateral restraint for accuracy
• Aluminium alloy construction minimises mass while maintaining rigidity

Applications


• Suitable for pick-and-place stations requiring guided motion
• Ideal for component positioning in Electronic Assembly lines
• Used with linear fixtures in mechanical test rigs
• Can be used for end-of-arm tooling alignment in automation cells
• Used for actuation where top, bottom or side mounting is required

What mounting orientations are possible with this cylinder?


It supports bottom, TOP and side attachment options to accommodate varied machine designs and mounting constraints.

What operating temperature range should be observed?


It functions between -10°C and 60°C, ensuring compatibility with typical factory ambient and process conditions.

How fast can the piston move under normal conditions?


The device permits piston speeds up to 500 mm/s to support higher cycle-rate applications.

What is the maximum allowable working pressure?


The unit is rated for up to 1 MPa operating pressure for pneumatic supply and control.

관련된 링크들