PicoScope 3000 Series, 200 MHz PC Based Oscilloscope 18-Channel

모든 Oscilloscopes 열람하기
현재 비가용
RS는 이 제품을 더 이상 판매하지 않습니다.
RS 제품 번호:
818-2879
Distrelec 제품 번호:
300-08-271
제조사 부품 번호:
PicoScope 3206D MSO
제조업체:
Pico Technology
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Pico Technology

Product Type

Oscilloscope

Bandwidth

200MHz

Number of Channels

18

Model Number

PicoScope 3206D MSO

Oscilloscope Type

PC Based

Interface Type

CAN, IIC, LIN, RS232, SPI, UART, USB

Series

PicoScope 3000

Height

40mm

Length

190mm

Standards/Approvals

RoHS, WEEE

Width

170mm

Maximum Vertical Sensitivity

4V/div

Rise Time

1.75ns

Maximum Time Base

5000s/div

Minimum Vertical Sensitivity

4mV/div

Minimum Time Base

500ps/div

Vertical Resolution

8 bit

Power Source

USB

COO (Country of Origin):
GB

PicoScope 3000 Series Oscilloscope, 200MHz Bandwidth, 500ps/div Time Base - PicoScope 3206D MSO


This oscilloscope is a PC-connected diagnostic instrument designed for signal visualisation and mixed-signal analysis in development and test environments. It operates from a USB supply and links to host software to display analogue and digital signals, accommodating a broad range of serial bus interfaces for system-level debugging.

Features and Benefits:


• 200MHz bandwidth delivers clear frequency-domain observation
• 500ps/div minimum time base captures fast transient events
• 1.75ns rise time enables accurate edge characterisation
• 8-bit vertical resolution supports consistent amplitude sampling
• 4mV/div minimum sensitivity reveals low-amplitude signals

Applications


• Suitable for automotive network bus debugging with CAN and LIN
• Ideal for embedded systems analysis using I2C and SPI
• Used with serial peripherals employing UART and RS232
• Can be used for mixed-signal verification across 18 channels
• Used for portable PC-based measurement where USB power is required

How many channels are available for mixed-signal capture?


It provides an 18-channel mixed-signal configuration allowing concurrent analogue and digital waveform acquisition.

Which physical interfaces can I expect to probe for protocol analysis?


The unit supports CAN, I2C, LIN, RS232, SPI and UART interfaces for direct protocol-level inspection.

What are the unit’s physical and supply characteristics?


The instrument measures 190 mm in length, 170 mm in width and 40 mm in height, and it is powered via USB.

How does its dynamic range aid signal measurement?


With an 8-bit vertical resolution and a minimum sensitivity of 4 mV/div the instrument resolves small amplitude variations while maintaining broad amplitude coverage.

관련된 링크들