Amprobe Cable Tester BNC, RJ45, LAN-1

Amprobe LAN-1 Cable Tester is designed to work with various data cables and connectors. This cable tester provides a quick go/no-go LED display of the wiring and connection of item under test.

• Loopback test or remote test
• Buzzer sound for errors in the cable
• 300m maximum line length
• Approx. 20 hour battery life
• 2 sets of LED, signal and test

Tests pin configuration for 10/100 base –T, 10 base-2, RJ45 modular, AT&T 258A, EIA / TIA 568A/568B cables and Token Ring cables
Checks for continuity, interruptions, short circuits or incorrect connections
Tests installed cables or the patch panels by using the remote termination module
Performs loopback or remote tests
Buzzer sound warning for error condition
Two sets of LED lights for signal and test indication
Maximum cable length: >300 metres
Connectors: RJ45, BNC

LAN testers are devices that allow a user to verify and test a connection or signal within a data cable. The types of tests include whether the cable is set up correctly, connected, the strength or speed of the signal being sent through the cable.

Usually made up of 2 sections or 2 boxes, a network cable tester will have a receiver and a transmitter. A cable is then connected directly or with connectors to both for testing. Once the tester is switched on a signal or data is sent via the cable and a report or the results are shown on the receiver. Receivers comes in a variety of types, shapes and sizes and therefore the results may vary in the way they are displayed. Some have LED's, some show patterns in lights and some different colours. The tester instruction manual will show what the results mean but some testers help determine the connection speed and detect problems.

RJ45 is an 8-pin connector whereas RJ11 is only a 4 wire connector. RJ45 is used in Ethernet connections to connect computers to networks. RJ11 is more of a conventional telephone wire used to bring fibre into your house. RJ is the abbreviation of ’registered jack’.

Each unit is equipped with 3 RJ45/BNC adapter cables, a male/female BNC connector, 9 V battery and user manual.

Don't get your wires crossed – this network cable tester from Amprobe lets you verify cables in a snap. It's designed to work with data cables and connectors and can check for shorts, opens and continuity. You can see whether everything is set up correctly and test the strength and speed of your signals at the same time. Sort through your wiring cable by cable or pulse through pinouts at once – either way, the LED screen shows your results with a series of easy-to-read red and green lights.

• Error buzzer lets you know instantly if something's not right
• Check your wall plate and patch panels thanks to the remote testing function
• Maximum line length of 300m stands up to complicated field installations
• Connects easily to devices with widely used RJ45 and BNC connectors
• Broad operating temperature range of 0°C to +40°C makes it suitable for challenging settings

• Data networking
• Telecom cable installations
• IT storage systems

The tester's 9V battery provides 20 hours of power to see you through numerous testing jobs.

It's compact enough to take into the field, with dimensions of just 38 (H) x 130 (L) x 56mm (H).