제조사부품번호

Fluke LinkIQ DUO Cable+Wi-Fi+Network Network Tester RJ45, USB, Internal Antenna

RS 제품 번호:: 434-344
제조사 부품 번호:: LIQ-DUO-KIT-H6-UK
제조업체:: Fluke

Fluke LinkIQ DUO Cable+Wi-Fi+Network Network Tester RJ45, USB, Internal Antenna

Subtotal (1 unit)*

₩9,166,898.80

재고있음

5 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩9,166,898.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 434-344
제조사 부품 번호:: LIQ-DUO-KIT-H6-UK
제조업체:: Fluke

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Fluke
	Product Type	Cable Tracer
	Equipment Type	Network Tester
	Connector Type	RJ45, USB, Internal Antenna
	Model Number	LinkIQ DUO Cable+Wi-Fi+Network
	Tone	Yes
	Power Source	Battery
	Battery Type	Lithium-ion
	Battery Life	8h
	Display Type	Capacitive Touch Display
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	45°C
	Height	50mm
	Weight	624g
	Standards/Approvals	Ethernet Alliance to IEEE 802.3af/at/bt
	Length	220mm
	Plug Type	USB Type C

	모두 선택
	브랜드 Fluke
	Product Type Cable Tracer
	Equipment Type Network Tester
	Connector Type RJ45, USB, Internal Antenna
	Model Number LinkIQ DUO Cable+Wi-Fi+Network
	Tone Yes
	Power Source Battery
	Battery Type Lithium-ion
	Battery Life 8h
	Display Type Capacitive Touch Display
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 45°C
	Height 50mm
	Weight 624g
	Standards/Approvals Ethernet Alliance to IEEE 802.3af/at/bt
	Length 220mm
	Plug Type USB Type C

COO (Country of Origin):: US

Fluke Cable Tracer, 8h Battery Life, 624g Weight - LIQ-DUO-KIT-H6-UK

This cable tracer is a handheld tester designed to verify twisted-pair cabling and diagnose network connectivity in industrial and commercial installations. It combines frequency-based cable qualification up to 10GBASE-T with Active Ethernet diagnostics and optional Wi‑Fi analysis to support commissioning, fault location and troubleshooting across structured and industrial Ethernet links.

Features & Benefits

• Frequency-based tests validate bandwidth up to 10Gb/s and indicate pass/fail
• Measures distance to opens, shorts and unterminated conductors
• Identifies wire map faults including miswired and split pairs
• Ethernet diagnostics show nearest switch, port and VLAN details
• Performs IPv4 and v6 ping tests with response time reporting
• Conducts PoE verification with class detection and loaded power measurement

Applications

• Suitable for commissioning 10Gb/s copper data links in data centres
• Ideal for troubleshooting PoE cameras and access points on switches
• Used for validating Industrial Ethernet cabling with M12/M8 interfaces
• Can be used for on-site Wi‑Fi surveys where 6GHz operation is permitted
• Used with documentation workflows to export results and generate reports

How long does the unit run on a single charge?

The rechargeable lithium‑ion pack delivers approximately 8 h of typical operation and charges via USB‑C.

Which interfaces are available for physical connection?

The tester provides an RJ45 test port Plus USB‑C host Interface and internal antenna on Wi‑Fi capable variants.

How many test results can be stored for reporting?

The instrument stores up to 1,000 named results which can be exported for PC reporting.

What Wi‑Fi bands are analysed by the device?

When enabled, the analyser receives 2.4 GHz, 5 GHz and 6 GHz bands with transmission limited to frequencies authorised for the country of sale.

What environmental limits apply during operation?

Intended for use between 0 °C and 45 °C with operating humidity limits specified for higher temperature ranges.