RS PRO RS232C

모든 Network Testers 열람하기

Subtotal (1 unit)*

₩11,693.60

Add to Basket
수량 선택 또는 입력
재고있음
  • 783 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩11,693.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
202-537
제조업체:
RS PRO
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

RS PRO

Product Type

Line Monitor

Connector Type

RS232C

Tone

Yes

Maximum Operating Temperature

60°C

Length

53mm

Standards/Approvals

No

Height

16mm

Width

53 mm

COO (Country of Origin):
TW

RS Pro Mini RS-232 Monitor


This small and effortless RS-232 breakout box is a super simple way of monitoring RS-232C/V24 data traffic. The small adapter comes equipped with 9 LEDs that indicate the status of the transmission on the most significant lines. All that is required is to plug it in-line so this requires no connectors or software. All lines are wired pin to pin.

Features and benefits-

• Super easy to use, just plug and monitor.

• 18 Efficient LEDs to indicate errors. Red indicates +VE high and green indicates –VE low.

• All lines are wired pin to pin

• 500 mating cycles

• 30mA, 15 mΩ contact rating

• 25-way ’D’ connector M-F line installation

You can use this RS-232 breakout box to debug and solve interface problems. With it being so small and compact you can take it anywhere and test almost any cable you need. This would make a great use in an IT kitbag.

Make sure to plug the correct end of the RS-232 port onto the correct end of the DTE cable otherwise the lights will not correspond with the actual signals.

RS PRO

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

Line Monitors


Line monitors designed for rapid checking and trouble shooting of computer interfaces especially EIA RS-232C (V24)

Conforms to RS-232 and discriminates against out of tolerance signals

The LEDs on the front panels of the testers are generally on the signal originating side of the unit, allowing the signal to be broken yet remain monitored

Separate RED and GREEN LEDs ensure unambiguous monitoring

관련된 링크들