FTDI Chip Multiprotocol Transceiver 20-Pin

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Multiprotocol Transceivers 열람하기
대량 구매 할인 기용 가능

Subtotal (1 reel of 5000 units)*

₩84,025,500.00

Add to Basket
수량 선택 또는 입력
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.

수량
한팩당
릴당*
5000 - 20000₩16,805.10₩84,027,450.00
25000 +₩16,302.00₩81,507,075.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
923-1613
제조사 부품 번호:
FT231XQ-R
제조업체:
FTDI Chip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

FTDI Chip

Product Type

Multiprotocol Transceiver

Number of Transmitters

1

Maximum Data Rate

3Mbps

Number of Receivers

1

Number of Transceivers

1

Mount Type

Surface

Pin Count

20

Minimum Supply Voltage

3.3V

Maximum Supply Voltage

5.25V

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Interface Standards

USB 2.0

Series

FT231X

Standards/Approvals

RoHS

Power Supply Type

USB

Automotive Standard

No

Supply Current

8mA

FT230X, FT231X, FT234XD - Full Speed USB to UART, FTDI Chip


The FTDI Chip FT230X and FT234XD are Ful Speed USB to Basic serial UART Interface devices. The FT231X is a Full Speed USB to Full Handshake UART Interface.

They have a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count.

Capable of operating up to 3 MBaud, with low power consumption (8 mA), all USB to UART devices operate efficiently with USB host controllers. They use as little bandwidth as possible.

The FT230X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.

- Fully integrated MTP memory, clock generation, AVCC filtering, Power-On Reset (POR) and LDO regulators.

- Configurable CBUS I/O Pin Options.

- Asynchronous and Synchronous Bit Bang Modes.

- Operates at between +3.3 V and +5.25 V. A nominal operational mode current of 8 mA and a nominal USB suspend mode current of 125 μA.

관련된 링크들