Fluke T5-1000 + 1AC-II Multifunction Tester Set

RS 제품 번호:: 731-8979
제조사 부품 번호:: Fluke T5-H5-1AC II/UK
제조업체:: Fluke

Fluke T5-1000 + 1AC-II Multifunction Tester Set

Subtotal (1 unit)*

₩500,944.80

제한된 재고

1 개 남음 배송 준비 완료
추가로 다른 지역에서 9 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩500,944.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 731-8979
제조사 부품 번호:: Fluke T5-H5-1AC II/UK
제조업체:: Fluke

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Fluke
	Product Type	Multifunction Tester Set
	Model Number	T5-1000 + 1AC-II
	Maximum Voltage Measurement	1000V ac
	Test Type	Continuity, Resistance, SSR Isolated Flyback Converter, MOSFET
	Earth Resistance Measurement	No
	Battery Life	360h
	Length	30.5mm
	Height	203mm
	Weight	380g
	Standards/Approvals	EN 610101, CSA, VDE, IEC 60529, CE
	Width	51 mm
	IP Rating	IP52
	Test Standards	EN 61326
	Minimum Operating Temperature	-10°C
	Safety Category Level	CAT IV, CAT III
	Power Source	Battery
	Display Type	LED
	Battery Type	AA
	Safety Category Voltage	1000V
	Maximum Operating Temperature	50°C

	모두 선택
	브랜드 Fluke
	Product Type Multifunction Tester Set
	Model Number T5-1000 + 1AC-II
	Maximum Voltage Measurement 1000V ac
	Test Type Continuity, Resistance, SSR Isolated Flyback Converter, MOSFET
	Earth Resistance Measurement No
	Battery Life 360h
	Length 30.5mm
	Height 203mm
	Weight 380g
	Standards/Approvals EN 610101, CSA, VDE, IEC 60529, CE
	Width 51 mm
	IP Rating IP52
	Test Standards EN 61326
	Minimum Operating Temperature -10°C
	Safety Category Level CAT IV, CAT III
	Power Source Battery
	Display Type LED
	Battery Type AA
	Safety Category Voltage 1000V
	Maximum Operating Temperature 50°C

COO (Country of Origin):: MY

Fluke Multifunction Tester Set, 1000V Maximum Voltage Measurement, IP52 - Fluke T5-H5-1AC II/UK

This multifunction tester set is a Compact diagnostic kit for electricians and engineers to verify voltage, continuity, resistance and current on site. It combines a versatile voltage/continuity/current tester with a non-contact voltage detector to speed fault-finding and Basic electrical verification across installations, maintenance and service tasks.

Features & Benefits

• Measures AC/DC voltage to 1000V for high-voltage checks
• OpenJaw current sensing up to 100 A for clamp-style measurements
• Resistance range to 1000 Ω for circuit integrity assessment
• Continuity beeper for Rapid go/no-go confirmation
• IP52 ingress protection for use in dusty or damp locations
• Battery operation with AA cells delivering up to 360 h runtime

Applications

• Suitable for troubleshooting control panels and distribution boards
• Ideal for commissioning site wiring and verification of circuits
• Used for on-site maintenance of motors and industrial drives
• Can be used for fault diagnosis of MOSFETs, SSRs and isolated converters
• Suitable for quick live-voltage detection on sockets and cabling

How is current measured without disconnecting the circuit?

The tester uses an OpenJaw clamp-style sensor that lets you measure conductor current up to 100 A without opening the circuit path.

What protection levels does the kit provide for use on mains installations?

The instrument meets CAT IV 1000V and CAT III 1000V input protection standards and conforms to EN 61010 and related safety approvals.

How does the non-contact detector indicate presence of voltage?

The pocket-sized voltage detector provides a glowing tip Plus an audible beeper when it senses AC voltage, enabling quick identification of live conductors.

What environmental range and durability can I expect during site use?

It operates between -10 °C and 50 °C, withstands a 3M drop, and carries an IP52 rating for protection against limited dust ingress and dripping water.

Which measurement and test types are supported for electronic power components?

The kit supports continuity, resistance measurement, and tests relevant to SSRs, MOSFETs and isolated flyback converter scenarios.

Supplied with

Fluke T5-1000, Fluke 1AC II, H5 holster, batteries & instructions