Fluke T90, Digital Voltage Tester, 690V ac/dc Continuity Check, Battery Powered CAT II, CAT III, FLUKE T90

RS 제품 번호:: 750-8438
Distrelec 제품 번호:: 304-11-288
제조사 부품 번호:: FLUKE T90
제조업체:: Fluke

Fluke T90, Digital Voltage Tester, 690V ac/dc Continuity Check, Battery Powered CAT II, CAT III, FLUKE T90

Subtotal (1 unit)*

₩190,242.00

제한된 재고

243 개 단위 배송 준비 완료
추가로 2026년 5월 21일 부터 39 개 단위 배송
추가로 2026년 6월 04일 부터 42 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩190,242.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 750-8438
Distrelec 제품 번호:: 304-11-288
제조사 부품 번호:: FLUKE T90
제조업체:: Fluke

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Fluke
	Product Type	Voltage Tester
	Continuity Check	Yes
	Display Type	Digital
	RCD Trip Test	Yes
	IP Rating	IP54
	Battery Type	AAA
	Power Source	Battery
	Weight	180g
	Minimum Operating Temperature	-15°C
	Maximum Voltage	690V ac/dc
	Maximum Operating Temperature	45°C
	Length	230mm
	Standards/Approvals	No
	Hazardous Area Certification	No
	Width	65mm
	Height	38mm
	Safety Category Voltage	690, 600V
	Model Number	T90
	Safety Category Level	CAT II, CAT III

	모두 선택
	브랜드 Fluke
	Product Type Voltage Tester
	Continuity Check Yes
	Display Type Digital
	RCD Trip Test Yes
	IP Rating IP54
	Battery Type AAA
	Power Source Battery
	Weight 180g
	Minimum Operating Temperature -15°C
	Maximum Voltage 690V ac/dc
	Maximum Operating Temperature 45°C
	Length 230mm
	Standards/Approvals No
	Hazardous Area Certification No
	Width 65mm
	Height 38mm
	Safety Category Voltage 690, 600V
	Model Number T90
	Safety Category Level CAT II, CAT III

해당 안됨

COO (Country of Origin):: GB

Fluke Voltage Tester, 690V Maximum Voltage, IP54 - FLUKE T90

This handheld voltage tester is a two-pole instrument designed to verify presence or absence of voltage and to check continuity in industrial and commercial electrical systems. It operates across low to high mains levels and is powered by AAA batteries, delivering straightforward indications via backlit LEDs and audible signals to support routine troubleshooting in automation, electronics and mechanical environments.

Features & Benefits

• Measures up to 690V AC/DC for high-voltage verification
• Continuity check with audible indication for quick circuit confirmation
• RCD trip test function for on-site residual-current device verification
• IP54-rated protection for use in dusty and splash-prone locations
• Dual-insulated lead tested to extended bend cycles for durability
• Low-battery indicator to prevent inaccurate readings during use

Applications

• Suitable for verifying live conductors on distribution boards
• Ideal for checking continuity in control panels and wiring looms
• Used for on-site RCD testing during safety maintenance
• Can be used for phase detection with single-pole testing
• Used with field service and commissioning tasks in factories

What power source does it require and how does that affect field use?

It runs on AAA batteries which permit Compact handheld operation and straightforward battery replacement on site.

How does the tester perform under elevated ambient temperatures?

It is rated to operate up to 45°C, allowing use in warmer plant rooms and engine bays without derating.

Which safety categories cover common electrical distribution work?

It meets CAT II and CAT III classifications applicable to equipment testing on domestic and industrial installations up to specified voltages.

How heavy and portable is the unit for daily site carry?

The instrument weighs 180 g, enabling easy pocket or pouch carry for technicians.