Fluke 1662 Multifunction Tester 1000V With Wireless

Subtotal (1 unit)*

₩2,765,080.50

Add to Basket
수량 선택 또는 입력
재고있음
  • 13 개 단위 배송 준비 완료
  • 추가로 2026년 6월 25일 부터 25 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩2,765,080.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
113-5128
제조사 부품 번호:
FLK-1662 UK
제조업체:
Fluke
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Fluke

Product Type

Multifunction Tester

Loop Impedance Test Type

Phase to Neutral, Phase to Earth

Automatic RCD Test

Yes

RCD Ramp Test

Yes

Model Number

1662

Insulation Test Voltage

1000V

Maximum Voltage Measurement

500V ac/dc

Test Type

Resistance, Frequency, Wiring Polarity, Miniature GPS, RCD Test, Voltage, MOSFET, Phase Sequence Test, Insulation Resistance, Continuity

Downloadable Data

Yes

Interface Type

Wireless

Continuity Test Current

1mA

Battery Life

200h

RCD Test Type

Type A, AC, Type G, Type S

Height

125mm

Length

100mm

Weight

1.3kg

Remote Switch Mode

Yes

Width

250mm

Standards/Approvals

CSA, CE, EN/IEC 610102034, EN/IEC 610101

IP Rating

IP40

Test Standards

EN 61557-10, EN 61557-7, EN 61557-1

Plug Type

UK

Battery Type

AA

Display Type

Primary Display

Power Source

Battery

Safety Category Voltage

300, 500V

Safety Category Level

CAT IV, CAT III

Maximum Operating Temperature

40°C

Minimum Operating Temperature

-10°C

제외

COO (Country of Origin):
GB

Fluke Multifunction Tester, 500V Maximum Voltage Measurement, 1000V Insulation Test Voltage - FLK-1662 UK


This multifunction tester is a handheld installation instrument designed for electrical tradespeople and field engineers to perform routine safety and diagnostic tests on installations. It combines voltage and frequency checks, polarity verification, insulation resistance up to 1000 V, loop and line impedance measurements, and RCD timing and tripping evaluation in a single portable unit for site use.

Features & Benefits


• Measures insulation resistance up to 1000V for comprehensive fault finding
• Performs RCD ramp tests and tripping current measurement for compliance checks
• Continuity test at 1 mA to protect sensitive circuits and motor windings
• Calculates PEFC and PSC from measured voltage and loop resistance
• Wireless Interface with remote probe for safer, more efficient testing
• Z-max memory stores highest loop values for Rapid evaluation

**Applications**


• Suitable for inspection of fixed wiring and consumer units on construction sites
• Ideal for verifying RCD performance and installation commissioning
• Used for motor winding continuity checks in maintenance routines
• Can be used to determine prospective short-circuit current for system studies
• Used with site instrumentation where portable battery-powered testing is required

What batteries does it use and how long do they typically last?


It runs on six AA cells and provides approximately 200 h of operation under normal test cycles.

Which RCD types and modes can it test automatically?


It supports A, AC, G and S RCD types, including variable-current ramp testing and automatic test sequences.

What safety and overvoltage categories apply to this instrument?


It meets CAT IV 300V and CAT III 500V overvoltage classifications for connection to distribution-level circuits.

How does it handle loop impedance measurements and reporting?


It measures phase-to-neutral and phase-to-earth impedance, offers a high-current mΩ mode, and logs Z-max values for later review.

Is the unit suitable for outdoor use in adverse conditions?


The enclosure has IP40 protection and is specified for operation between -10 °C and 40 °C.

Supplied with

The Fluke 1662 comes with:
AA batteries
Hard carrying case
Padded carrying and waist strap
Remote control probe and lead
Adapter
Heavy duty mains cord
Test leads

관련된 링크들

Be the first to know about our latest products and offers

Email address

The personal information you provide to us when signing up to this mailing list will be processed in line with the Privacy Policy