Gossen Metrawatt PROFITEST PRIME Starter Package Multifunction Tester 1kV With USB

Subtotal (1 unit)*

₩16,453,160.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 1 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩16,453,160.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
263-6762
제조사 부품 번호:
M516k
제조업체:
Gossen Metrawatt
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Gossen Metrawatt

Product Type

Multifunction Tester

Loop Impedance Test Type

2 Wire, 3 Wire

Automatic RCD Test

Yes

Model Number

PROFITEST PRIME Starter Package

RCD Ramp Test

Yes

Non-Tripping

No

Insulation Test Voltage

1kV

Maximum Voltage Measurement

230V

Earth Resistance Measurement

No

Downloadable Data

No

Interface Type

USB

Continuity Test Current

1.6mA

RCD Test Type

Type A

Weight

10.15kg

Standards/Approvals

IEC 603646, RoHS, EN 501101

Remote Switch Mode

Yes

Test Standards

DIN VDE 0100-600, EN 61010

IP Rating

IP40

Safety Category Voltage

300V

Safety Category Level

CAT IV, CAT III

Power Source

Battery

Minimum Operating Temperature

+5°C

Battery Type

Rechargeable

Maximum Operating Temperature

+50°C

COO (Country of Origin):
DE

Gossen-Metrawatt Multifunction Tester, 230V Maximum Voltage Measurement, 1000V Insulation Test Voltage - M516k


This multifunction tester is a portable electrical instrument designed for verification of protective devices and insulation in low-voltage installations. It operates from a rechargeable battery and is intended for on-site use where measurement of voltage, insulation and RCD performance is required. The unit complies with relevant electrical wiring and test standards and provides a rugged IP40-rated enclosure for field environments.

Features and Benefits:


• *Made in Germany
• 1000 V insulation test voltage provides high-voltage dielectric checks
• 1.6 mA continuity test current yields measurable low-resistance verification
• RCD ramp test capability enables assessment of trip thresholds
• Loop impedance 2‑wire/3‑wire tester supports both common loop methods
• USB Interface allows straightforward data transfer to external systems

Applications


• Suitable for testing RCD Type A behaviour on installations
• Used for insulation verification on cables and equipment
• Ideal for loop impedance checks during installation verification
• Can be used for continuity tests in electrical maintenance
• Suitable for portable automatic RCD test instrument workflows

What supply does it use for field operation?


It runs from an internal rechargeable battery allowing untethered measurements.

Which safety categories does it support for on-site testing?


It is rated for CAT IV and CAT III environments with a 300 V safety‑category voltage.

What environmental conditions must be observed during use?


It is designed to operate between +5 °C and +50 °C and has IP40 ingress protection.

Which standards describe its test and measurement conformity?


It is aligned with IEC 60364, DIN VDE 0100‑600 and EN 61010 for measurement methods and safety.

관련된 링크들