onsemi, Stepper Motor Driver IC 24-Pin, SSOP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Motor Driver ICs 열람하기
대량 구매 할인 기용 가능

Subtotal (1 reel of 2500 units)*

₩5,733,000.00

Add to Basket
수량 선택 또는 입력
마지막 RS 재고
  • 최종적인 2,500 개 unit(s)이 배송 준비 됨

수량
한팩당
릴당*
2500 - 2500₩2,293.20₩5,731,050.00
5000 - 7500₩2,246.40₩5,616,487.50
10000 +₩2,201.55₩5,503,875.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
189-0248
제조사 부품 번호:
NCV7750DPR2G
제조업체:
onsemi
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

onsemi

Motor Type

Stepper

Product Type

Motor Driver IC

Mount Type

Surface

Package Type

SSOP

Pin Count

24

Output Current

1.3A

Minimum Supply Voltage

-0.3V

Maximum Supply Voltage

5.5V

Minimum Operating Temperature

-40°C

Typical Switching Frequency

5MHz

Maximum Operating Temperature

150°C

Height

1.5mm

Length

8.65mm

Series

NCV7750

Standards/Approvals

Pb-Free

Inverter Power Rating

100mW

Supply Current

3mA

Automotive Standard

AEC-Q100

Power Up without Open Circuit Detection

Low Quiescent Current

16 bit SPI control

Limp Home Functionality

3.3V and 5V compatible Digital Input Supply Range

Fault Reporting of Open Load, Over Load, and Over Temperature

Power On Reset

Uniform output structure of all outputs on one side of the package.

4 Channels

600 mA Low-Side Drivers

Parallel Input Pins

Allows for power up without LED load illumination.

Able to report errors and is capable of daisy chain connections.

Automotive system feature allowing the vehicle to maintain operation with a defective micro processor.

Suitable for both 3.3V and 5V micro processor interfaces.

The micro processor and report unusual activity for troubleshooting and system integrity purposes.

Maintains a smooth system power up and power down.

Simplifies printed circuit board layouts.

Automotive requirement maintains site and change control.

Applications

Relay Driver

LED Driver.

Stepper Motor Driver

End Products

Automotive Body Control Unit

Automotive Engine Control Unit

관련된 링크들