Electromen OY 0.08 kW DC Motor Controller, 20V dc, 34 V dc, 4.2A

모든 Motor Controllers 열람하기

Subtotal (1 unit)*

₩458,581.50

Add to Basket
수량 선택 또는 입력
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량
한팩당
1 +₩458,581.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
510-1164
제조사 부품 번호:
EM-101/BI
제조업체:
Electromen OY
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Electromen OY

Product Type

DC Motor Controller

Output Voltage

36V

Supply Voltage

20, 34V dc

Current Rating

4.2A

Power Rating

0.08kW

Overall Length

89mm

Overall Width

73mm

Overall Depth

26mm

Standards/Approvals

No

COO (Country of Origin):
FI

Electromen - EM-101 DC MOTOR CONTROLLER 20-34 V DC, 4.2A


The EM-101 is developed for driving control and direction change in brushed DC motor applications up to 70W.Control can be performed with relay, open collector outputs or set with analogue voltage,due to the advanced pulse control (PWM) the unit operates with high efficiency, low temperature losses and provides a high starting torque.

EM-101 has adjustable acceleration and braking ramps and adjustable current limit (when reached this is indicated by onboard LED)

Loading of the motor can be compensated with inbuilt in resistor adjustment and is adjusted with DIP switches

Two braking options are available, for most effective braking 'reverse braking' mode can be used, this reverses driving and provides an extremely fast function

The drive also offers dynamic braking which shorts the motor terminals during the braking

Features and Benefits


High efficiency drive with low RF emissions

4-quadrant control

Continuous and 2-step speed controlling

Settable current limit

Settable acceleration/brake ramp

Braking options

Load compensation

Compact and DIN rail mountable

4 Quadrant 24V


The drive is designed for modern automation systems. Control can be performed easily with relay or open collector outputs. Analogue controls work with ±10V voltage. Usable motor can be permanent magnet motor with brushes,in power range of 5 to 80 W. Due to the advanced pulse control (PWM) the unit operates with high efficiency, low temperature losses and provides a high starting torque. Loading of the motor can be compensated with in-built RI-adjustment. The current, or in other words, the torque of the motor can be controlled with DIP-switch. The operation of the current limit is indicated with a red led. There are a variety of braking options available in this device. For most effective braking "reverse braking" -mode can be used. In this mode reversed driving is used for braking, which effects extremely fast function. Additionally the card utilises short circuit braking which short circuits the motor circuit during the braking. The drive also has in-built and selectable timing for the acceleration and deceleration ramps.

4 Quadrants

Self recovery fuse (4A)

Adjustable current limit

Adjustable acceleration / deceleration ramps

Load compensation (IR comp)

Special braking options

Supply voltage compensation

Positive logic control

관련된 링크들