Electromen OY DC Motor Controller, 12/32 V dc, 10 A, Potentiometer Function
- RS 제품 번호:
- 773-6826
- 제조사 부품 번호:
- EM-175
- 제조업체:
- Electromen OY
Subtotal (1 unit)*
₩208,097.20
재고있음
- 12 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩208,097.20 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 773-6826
- 제조사 부품 번호:
- EM-175
- 제조업체:
- Electromen OY
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Electromen OY | |
| Product Type | DC Motor Controller | |
| Control Function | Potentiometer | |
| Supply Voltage | 12/32 V dc | |
| Output Voltage | 12/24 V | |
| Current Rating | 10 A | |
| Overall Length | 43mm | |
| Overall Width | 73mm | |
| Overall Depth | 30 mm | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 Electromen OY | ||
Product Type DC Motor Controller | ||
Control Function Potentiometer | ||
Supply Voltage 12/32 V dc | ||
Output Voltage 12/24 V | ||
Current Rating 10 A | ||
Overall Length 43mm | ||
Overall Width 73mm | ||
Overall Depth 30 mm | ||
Standards/Approvals No | ||
- COO (Country of Origin):
- FI
Electromen - EM-175 DC MOTOR CONTROLLER 12-24 V DC, 10A 2-QUAD
The EM-175 motor driver is designed for DC-motor speed control and is suitable for 12 or 24V supply. Control can be provide by a potentiometer or direct voltage signal and the drive offers adjustable load compensation, if required.The current limit can be set with either the trim pot or with a direct voltage signal, this can be adjusted to protect the motor and transmission in a jam situations
Start-up speed can be adjusted with an acceleration ramp, this is also set with an on board trim pot
The drive offers two dynamic braking options: the 'zero braking' option resets speed setting to zero (0V) on any instance of braking and the drive effectively starts from zero rpm.
The second 'ramp braking' method reduces speed setting during braking based on ramp time, this means that the motor always re-starts from ramped down speed value after a braking phase.
When the unit is battery-operated, regenerative braking can be used this supplies energy back into the battery.
Regenerative braking is activated automatically when motor generate back voltage exceeds a set value, for instance, when set speed value is being reduced very rapidly
The freewheel command sets the motor free from all control, the freewheel command overrides all other commands
Features and Benefits
12-24Vdc, 10A continuous, 15A peak
Speed and braking control
Adjustable start ramp and current limit
Compact and DIN rail mountable;High efficiency solid state power stage
Bidirectional PWM control
2-quadrant - drive and brake
Dynamic and regenerative braking
Soft start ramp
Adjustable current limit
Load compensation
High peak loading handling
DIN rail mountable
EM-175 DC-Motor Controller
EM-175 motor driver is designed for DC-motor speed control. The unit regulates motor voltage so non regulated supply voltage is well suited. A load affecting the motor rpm can be compensated with an adjustable load compensation (RxI).
Unidirectional
2-quadrant, drive and brake
Dynamic and regenerative braking
Smooth start-up ramp
Adjustable current limit
Load compensation
High efficiency
High peak loading capacity
Rail mountable
관련된 링크들
- Electromen OY DC Motor Controller, 12 → 32 V dc, 15 A, 40 V
- Electromen OY DC Motor Controller, 12 → 24 V dc, 3 A, 35 V
- Electromen OY DC Motor Controller, 12 → 32 V dc, 8 A, 40 V
- Electromen OY DC Motor Controller, 12 → 35 V dc, 6 A, 35 V dc
- Electromen OY DC Motor Controller, 12 → 35 V dc, 3 A, 35 V dc
- Electromen OY DC Motor Controller, 12 → 36 V dc, 10 A, 12 V dc, 24 V dc
- Electromen OY DC Motor Controller, 12 → 35 V dc, 10 A, 12 V dc, 24 V dc
- Electromen OY DC Motor Controller, 12 → 48 V dc, 50 A, 12 V dc, 24 V dc