Allegro Microsystems Surface Hall Effect Sensor 4.5 V 5.5 V, SOT-23, 3-Pin
- RS 제품 번호:
- 753-2018
- 제조사 부품 번호:
- A1326LLHLT-T
- 제조업체:
- Allegro Microsystems
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 2 units)*
₩3,666.00
재고있음
- 추가로 2025년 12월 29일 부터 34 개 단위 배송
- 추가로 2026년 1월 05일 부터 1,034 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 2 - 748 | ₩1,833.00 | ₩3,666.00 |
| 750 - 1498 | ₩1,804.80 | ₩3,609.60 |
| 1500 + | ₩1,757.80 | ₩3,515.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 753-2018
- 제조사 부품 번호:
- A1326LLHLT-T
- 제조업체:
- Allegro Microsystems
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Allegro Microsystems | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect Sensors | |
| Technology | BiCMOS Chopper Stabilised | |
| Mount Type | Surface | |
| Magnetic Type | Linear | |
| Maximum Frequency Response | 17kHz | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| Package Type | SOT-23 | |
| Minimum Operating Temperature | -40°C | |
| Sensitivity | 2.5mV/g | |
| Maximum Operating Temperature | 150°C | |
| Pin Count | 3 | |
| Width | 1.91 mm | |
| Series | A132 | |
| Standards/Approvals | Pb Free | |
| Height | 0.95mm | |
| Length | 2.98mm | |
| Supply Current | 9mA | |
| Response Time | 32μs | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 Allegro Microsystems | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect Sensors | ||
Technology BiCMOS Chopper Stabilised | ||
Mount Type Surface | ||
Magnetic Type Linear | ||
Maximum Frequency Response 17kHz | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
Package Type SOT-23 | ||
Minimum Operating Temperature -40°C | ||
Sensitivity 2.5mV/g | ||
Maximum Operating Temperature 150°C | ||
Pin Count 3 | ||
Width 1.91 mm | ||
Series A132 | ||
Standards/Approvals Pb Free | ||
Height 0.95mm | ||
Length 2.98mm | ||
Supply Current 9mA | ||
Response Time 32μs | ||
Automotive Standard No | ||
A1324/5/6 Linear Hall Effect Sensor with Analogue Output, Allegra Microsystems
The Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. Featuring a quiescent voltage output of 50% of the supply voltage and are pre-programmed to sensitivities of 5.0 mV/g, 3.125 mV/g, and 2.5 mV/g, respectively.
Each IC integrates a Hall element, temperature-compensating circuitry, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique.
Available in a 3-pin ultra-mini SIP package, and a 3-pin surface mount SOT-23 package.
Temperature-stable quiescent output voltage and sensitivity
Output voltage proportional to magnetic flux density
Low-noise output increases accuracy
Precise recoverability after temperature cycling
Ratiometric rail-to-rail output
Wide ambient temperature range: –40°C to 150°C
Immune to mechanical stress
Solid-state reliability
Enhanced EMC performance for stringent automotive applications
Hall Effect Sensors, Allegro MicroSystems
관련된 링크들
- Allegro Microsystems Surface Hall Effect Sensor 4.5 V 5.5 V, SOT-23, 3-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor Switch, SOT-23, 3-Pin
- Allegro Microsystems Surface Hall Effect Sensor 3 V 24 V, SOT-23, 3-Pin
- Allegro Microsystems 2-Axis Surface Hall Effect Sensor 4 V 24 V, SOT-23W, 5-Pin
- Allegro Microsystems 1-Axis Surface Hall Effect Sensor 4.5 V 5.5 V, Analogue, SOT-23, 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 4.5 V 5.5 V, SIP, 3-Pin
- Allegro Microsystems Surface Hall Effect Sensor 2.4 V 5.5 V, SOT-23, 3-Pin
- Allegro Microsystems Surface Hall Effect Sensor 2.5 V 3.5 V, SOT-23, 3-Pin