Allegro Microsystems Surface Hall Effect Sensor 2.5 V 3.5 V, SOT-23, 3-Pin
- RS 제품 번호:
- 172-9254
- 제조사 부품 번호:
- A3212ELHLT-T
- 제조업체:
- Allegro Microsystems
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 reel of 3000 units)*
₩2,036,040.00
재고있음
- 3,000 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 릴당* |
|---|---|---|
| 3000 - 3000 | ₩678.68 | ₩2,037,168.00 |
| 6000 - 9000 | ₩665.52 | ₩1,996,560.00 |
| 12000 + | ₩652.36 | ₩1,956,516.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 172-9254
- 제조사 부품 번호:
- A3212ELHLT-T
- 제조업체:
- Allegro Microsystems
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Allegro Microsystems | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect Sensors | |
| Technology | CMOS, Chopper Stabilised | |
| Mount Type | Surface | |
| Magnetic Type | Omnipolar | |
| Maximum Frequency Response | 340kHz | |
| Minimum Supply Voltage | 2.5V | |
| Package Type | SOT-23 | |
| Maximum Supply Voltage | 3.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Pin Count | 3 | |
| Height | 0.95mm | |
| Width | 1.91 mm | |
| Series | A3211A3212 | |
| Standards/Approvals | AEC-Q100 | |
| Length | 2.98mm | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 2mA | |
| Response Time | 45μs | |
| 모두 선택 | ||
|---|---|---|
브랜드 Allegro Microsystems | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect Sensors | ||
Technology CMOS, Chopper Stabilised | ||
Mount Type Surface | ||
Magnetic Type Omnipolar | ||
Maximum Frequency Response 340kHz | ||
Minimum Supply Voltage 2.5V | ||
Package Type SOT-23 | ||
Maximum Supply Voltage 3.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Pin Count 3 | ||
Height 0.95mm | ||
Width 1.91 mm | ||
Series A3211A3212 | ||
Standards/Approvals AEC-Q100 | ||
Length 2.98mm | ||
Automotive Standard AEC-Q100 | ||
Supply Current 2mA | ||
Response Time 45μs | ||
A3211/2 Micropower, Ultra Sensitive Hall Effect Switches, Allegro Microsystems
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches with latched digital output. Their 2.5 V to 3.5 V operation and unique clocking scheme reduces the average operating power to less than 15 μW with a 2.75 V supply.
Either a north or south pole turns on the output in the A3212 and removing the magnetic field turns the output is off. This is reversed on the A3211.
Chopper stabilisation improves stability which reduces the residual offset voltage normally caused by device overmolding, temperature dependencies, and thermal stress.
Included on the chip is a Hall-voltage generator, small-signal amplifier, chopper stabilisation, a latch, and a MOSFET output.
Hall Effect Sensors, Allegro MicroSystems
관련된 링크들
- Allegro Microsystems Surface Hall Effect Sensor 2.5 V 3.5 V, SOT-23, 3-Pin
- Allegro Microsystems Surface Hall Effect Sensor 3.8 V 24 V, SOT-23, 3-Pin
- Allegro Microsystems Surface Hall Effect Sensor 2.4 V 5.5 V, SOT-23, 3-Pin
- Allegro Microsystems 1-Axis Surface Hall Effect Sensor 3.8 V 24 V, SOT-23, 3-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor Switch, SOT-23, 3-Pin
- Allegro Microsystems Surface Hall Effect Sensor 3 V 24 V, SOT-23, 3-Pin
- Allegro Microsystems Surface Hall Effect Sensor 4.5 V 5.5 V, SOT-23, 3-Pin
- Allegro Microsystems 2-Axis Surface Hall Effect Sensor 4 V 24 V, SOT-23W, 5-Pin