Allegro Microsystems 1 Axis Surface Hall Effect Sensor 4.5 V 5.5 V, Analogue, SOT-23, 3-Pin
- RS 제품 번호:
- 172-9259
- 제조사 부품 번호:
- A1324LLHLT-T
- 제조업체:
- Allegro Microsystems
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 reel of 3000 units)*
₩5,301,600.00
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 | 릴당* |
|---|---|---|
| 3000 - 12000 | ₩1,767.20 | ₩5,299,908.00 |
| 15000 + | ₩1,731.48 | ₩5,193,876.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 172-9259
- 제조사 부품 번호:
- A1324LLHLT-T
- 제조업체:
- Allegro Microsystems
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Allegro Microsystems | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Hall Effect Sensor | |
| Number of Axis | 1 | |
| Technology | BiCMOS | |
| Mount Type | Surface | |
| Interface Type | Analogue | |
| Magnetic Type | Linear | |
| Maximum Frequency Response | 17kHz | |
| Minimum Supply Voltage | 4.5V | |
| Package Type | SOT-23 | |
| Maximum Supply Voltage | 5.5V | |
| Sensitivity | 2.5mV/g | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 150°C | |
| Series | A132 | |
| Length | 2.98mm | |
| Standards/Approvals | EMC | |
| Height | 0.95mm | |
| Supply Current | 9mA | |
| Automotive Standard | No | |
| Response Time | 32μs | |
| 모두 선택 | ||
|---|---|---|
브랜드 Allegro Microsystems | ||
Sensor Type Hall Effect Sensors | ||
Product Type Hall Effect Sensor | ||
Number of Axis 1 | ||
Technology BiCMOS | ||
Mount Type Surface | ||
Interface Type Analogue | ||
Magnetic Type Linear | ||
Maximum Frequency Response 17kHz | ||
Minimum Supply Voltage 4.5V | ||
Package Type SOT-23 | ||
Maximum Supply Voltage 5.5V | ||
Sensitivity 2.5mV/g | ||
Minimum Operating Temperature -40°C | ||
Pin Count 3 | ||
Maximum Operating Temperature 150°C | ||
Series A132 | ||
Length 2.98mm | ||
Standards/Approvals EMC | ||
Height 0.95mm | ||
Supply Current 9mA | ||
Automotive Standard No | ||
Response Time 32μs | ||
- COO (Country of Origin):
- US
A1324/5/6 Linear Hall Effect Sensor with Analogue Output, Allegra Microsystems
The Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. Featuring a quiescent voltage output of 50% of the supply voltage and are pre-programmed to sensitivities of 5.0 mV/g, 3.125 mV/g, and 2.5 mV/g, respectively.
Each IC integrates a Hall element, temperature-compensating circuitry, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique.
Available in a 3-pin ultra-mini SIP package, and a 3-pin surface mount SOT-23 package.
Temperature-stable quiescent output voltage and sensitivity
Output voltage proportional to magnetic flux density
Low-noise output increases accuracy
Precise recoverability after temperature cycling
Ratiometric rail-to-rail output
Wide ambient temperature range: –40°C to 150°C
Immune to mechanical stress
Solid-state reliability
Enhanced EMC performance for stringent automotive applications
Hall Effect Sensors, Allegro MicroSystems
관련된 링크들
- Allegro Microsystems 1 Axis Through Hole Hall Effect Sensor 4.5 V 5.5 V, Analogue, SIP, 3-Pin
- Allegro Microsystems 1 Axis Surface Hall Effect Sensor 4.5 V 5.5 V, Analogue, SOT-23, 3-Pin
- Allegro Microsystems 2 Axis Surface Hall Effect Sensor 4 V 24 V, SOT-23W, 5-Pin
- Allegro Microsystems 1 Axis Through Hole Hall Effect Sensor 4.5 V 5.5 V, SIP, 3-Pin
- Allegro Microsystems Surface Hall Effect Sensor 4.5 V 5.5 V, SOT-23, 3-Pin
- Allegro Microsystems 1 Axis Surface Hall Effect Sensor 3 V 5.5 V, CB, 5-Pin
- Allegro Microsystems Surface Hall Effect Sensor 3 V 24 V, SOT-23, 3-Pin
- Allegro Microsystems 1 Axis Surface Hall Effect Sensor 3 V 5.5 V, SOIC W, 16-Pin