Infineon 3-Axis Surface Hall Effect Sensor 2.8 V 3.5 V, I2C, SSOP-14, 5-Pin

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Motion Sensor ICs 열람하기
현재 비가용
RS는 이 제품을 더 이상 판매하지 않습니다.
RS 제품 번호:
258-4174
제조사 부품 번호:
TLI493DW2BWA0XTSA1
제조업체:
Infineon
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Infineon

Product Type

Hall Effect Sensor

Sensor Type

Hall Effect

Number of Axis

3

Mount Type

Surface

Interface Type

I2C

Maximum Frequency Response

1000kHz

Minimum Frequency Response

400kHz

Minimum Supply Voltage

2.8V

Package Type

SSOP-14

Maximum Supply Voltage

3.5V

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

125°C

Pin Count

5

Width

0.93 mm

Length

1.13mm

Height

0.59mm

Standards/Approvals

IPC/JEDEC J-STD-020, RoHS

Automotive Standard

No

Supply Current

7nA

The Infineon XENSIV is the device for industrial and consumer applications, the low power 3D hall sensor with I2C interface. It uses our latest 3D Hall generation and is housed in an extremely small wafer-level package. With an 87 percent smaller footprint and 46 percent less height than previous comparable products, the sensor paves the way for new design options. Due to the small WLB-5 package and the low current consumption of 7 nA in power-down mode, the magnetic sensor is also suitable for use in applications that previously used resistor-based or optical solutions.

Power down mode with 7 nA (typ.) power consumption

Variable update frequencies and power modes

Triggering by external microcontroller possible via I2C protocol

X-Y angular measurement mode

Interrupt signal to indicate a valid measurement to the microcontroller

Pb-free (RoHS compliant) and halogen free package

관련된 링크들