Allegro Microsystems 1 Axis Through Hole Hall Effect Sensor 4.5 V 5.5V, Analogue, SIP, 3-Pin
- RS 제품 번호:
- 170-9125
- 제조사 부품 번호:
- A1324LUA-T
- 제조업체:
- Allegro Microsystems
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 받기
2500개 더 담고 ₩105,000.00 할인 받기
View bulk pricing optionsSubtotal (1 Bag of 500 units)*
₩1,049,000.00
재고있음
- 1,500 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | Per Bag* | 절감 |
|---|---|---|---|
| 500 - 2000 | ₩2,098.00 | ₩1,049,100.00 | - |
| 2500 + | ₩2,056.00 | ₩1,028,100.00 | ₩105,000.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 170-9125
- 제조사 부품 번호:
- A1324LUA-T
- 제조업체:
- Allegro Microsystems
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Allegro Microsystems | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect Sensors | |
| Number of Axis | 1 | |
| Technology | BiCMOS | |
| Mount Type | Through Hole | |
| Magnetic Type | Linear | |
| Interface Type | Analogue | |
| Maximum Frequency Response | 17kHz | |
| Minimum Supply Voltage | 4.5V | |
| Package Type | SIP | |
| Maximum Supply Voltage | 5.5V | |
| Sensitivity | 2.5mV/g | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Pin Count | 3 | |
| Height | 3.02mm | |
| Width | 1.52mm | |
| Standards/Approvals | EMC | |
| Length | 4.09mm | |
| Series | A132 | |
| Automotive Standard | No | |
| Supply Current | 9mA | |
| Response Time | 32μs | |
| 모두 선택 | ||
|---|---|---|
브랜드 Allegro Microsystems | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect Sensors | ||
Number of Axis 1 | ||
Technology BiCMOS | ||
Mount Type Through Hole | ||
Magnetic Type Linear | ||
Interface Type Analogue | ||
Maximum Frequency Response 17kHz | ||
Minimum Supply Voltage 4.5V | ||
Package Type SIP | ||
Maximum Supply Voltage 5.5V | ||
Sensitivity 2.5mV/g | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Pin Count 3 | ||
Height 3.02mm | ||
Width 1.52mm | ||
Standards/Approvals EMC | ||
Length 4.09mm | ||
Series A132 | ||
Automotive Standard No | ||
Supply Current 9mA | ||
Response Time 32μs | ||
A1324/5/6 Linear Hall Effect Sensor with Analogue Output, Allegra Microsystems
The Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. Featuring a quiescent voltage output of 50% of the supply voltage and are pre-programmed to sensitivities of 5.0 mV/g, 3.125 mV/g, and 2.5 mV/g, respectively.
Each IC integrates a Hall element, temperature-compensating circuitry, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique.
Available in a 3-pin ultra-mini SIP package, and a 3-pin surface mount SOT-23 package.
Temperature-stable quiescent output voltage and sensitivity
Output voltage proportional to magnetic flux density
Low-noise output increases accuracy
Precise recoverability after temperature cycling
Ratiometric rail-to-rail output
Wide ambient temperature range: –40°C to 150°C
Immune to mechanical stress
Solid-state reliability
Enhanced EMC performance for stringent automotive applications
Hall Effect Sensors, Allegro MicroSystems
관련된 링크들
- Allegro Microsystems 1 Axis Through Hole Hall Effect Sensor 4.5 V 5.5V, Analogue, SIP, 3-Pin
- Allegro Microsystems 1 Axis Through Hole Hall Effect Sensor 4.5 V 5.5V, SIP, 3-Pin
- Allegro Microsystems 1 Axis Through Hole Hall Effect Sensor 3 V 3.6V, Analogue, SIP, 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor, SIP, 3-Pin
- Allegro Microsystems 1 Axis Through Hole Hall Effect Sensor 3.8 V 24V, Ultra Mini SIP, 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 4.5 V 5.5V, SIP, 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 3 V 24V, SIP, 3-Pin
- Allegro Microsystems 1 Axis Surface Hall Effect Sensor 4.5 V 5.5V, Analogue, SOT-23, 3-Pin