Allegro Microsystems Through Hole Hall Effect Sensor 3 V 24 V, SIP, 3-Pin
- RS 제품 번호:
- 170-9112
- 제조사 부품 번호:
- A1220LUA-T
- 제조업체:
- Allegro Microsystems
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 Bag of 500 units)*
₩550,840.00
재고있음
- 1,500 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | Per Bag* |
|---|---|---|
| 500 - 500 | ₩1,101.68 | ₩551,028.00 |
| 1000 - 1500 | ₩1,075.36 | ₩537,210.00 |
| 2000 + | ₩1,058.44 | ₩528,938.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 170-9112
- 제조사 부품 번호:
- A1220LUA-T
- 제조업체:
- Allegro Microsystems
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Allegro Microsystems | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect Sensors | |
| Technology | Chopper Stabilised BiCMOS | |
| Mount Type | Through Hole | |
| Magnetic Type | Bipolar | |
| Maximum Frequency Response | 800kHz | |
| Minimum Supply Voltage | 3V | |
| Package Type | SIP | |
| Maximum Supply Voltage | 24V | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 150°C | |
| Series | A122 | |
| Width | 1.52 mm | |
| Height | 3.02mm | |
| Length | 4.09mm | |
| Standards/Approvals | Lead (Pb) Free | |
| Automotive Standard | AEC-Q100 | |
| Response Time | 25μs | |
| Supply Current | 4mA | |
| 모두 선택 | ||
|---|---|---|
브랜드 Allegro Microsystems | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect Sensors | ||
Technology Chopper Stabilised BiCMOS | ||
Mount Type Through Hole | ||
Magnetic Type Bipolar | ||
Maximum Frequency Response 800kHz | ||
Minimum Supply Voltage 3V | ||
Package Type SIP | ||
Maximum Supply Voltage 24V | ||
Minimum Operating Temperature -40°C | ||
Pin Count 3 | ||
Maximum Operating Temperature 150°C | ||
Series A122 | ||
Width 1.52 mm | ||
Height 3.02mm | ||
Length 4.09mm | ||
Standards/Approvals Lead (Pb) Free | ||
Automotive Standard AEC-Q100 | ||
Response Time 25μs | ||
Supply Current 4mA | ||
A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.
AEC-Q100 automotive qualified
Symmetrical latch switchpoints
Resistant to physical stress
Superior temperature stability
Output short circuit protection
Operation from unregulated supply down to 3 V
Reverse battery protection
Hall Effect Sensors, Allegro MicroSystems
관련된 링크들
- Allegro Microsystems Through Hole Hall Effect Sensor 3 V 24 V, SIP, 3-Pin
- Allegro Microsystems 1-Axis Through Hole Hall Effect Sensor 3 V 3.6 V, Analogue, SIP, 3-Pin
- Allegro Microsystems 1-Axis Through Hole Hall Effect Sensor 4.5 V 5.5 V, Analogue, SIP, 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 4.5 V 5.5 V, SIP, 3-Pin
- Allegro Microsystems 1-Axis Through Hole Hall Effect Sensor 4.5 V 5.5 V, SIP, 3-Pin
- Allegro Microsystems 1-Axis Through Hole Hall Effect Sensor 3.8 V 24 V, Ultra Mini SIP, 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 3.8 V 24 V, Ultra Mini SIP, 3-Pin
- Allegro Microsystems Through Hole Chopper Stabilised Precision Hall Effect Switch 3 V 24 V, SIP, 3-Pin