Vishay IRF820 Type N-Channel Power MOSFET, 2.5 A, 500 V Enhancement, 3-Pin TO-220AB

RS 제품 번호:: 543-0002
Distrelec 제품 번호:: 301-91-570
제조사 부품 번호:: IRF820PBF
제조업체:: Vishay

Vishay IRF820 Type N-Channel Power MOSFET, 2.5 A, 500 V Enhancement, 3-Pin TO-220AB

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 unit)*

₩916.50

추가로 2026년 6월 29일 부터 128 개 단위 배송
추가로 2026년 7월 06일 부터 418 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 12	₩916.50
13 - 24	₩877.50
25 +	₩838.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 543-0002
Distrelec 제품 번호:: 301-91-570
제조사 부품 번호:: IRF820PBF
제조업체:: Vishay

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Vishay
	Product Type	Power MOSFET
	Channel Type	Type N
	Maximum Continuous Drain Current Id	2.5A
	Maximum Drain Source Voltage Vds	500V
	Package Type	TO-220AB
	Series	IRF820
	Mount Type	Through Hole
	Pin Count	3
	Maximum Drain Source Resistance Rds	3Ω
	Channel Mode	Enhancement
	Typical Gate Charge Qg @ Vgs	24nC
	Minimum Operating Temperature	-55°C
	Maximum Power Dissipation Pd	50W
	Forward Voltage Vf	1.6V
	Maximum Gate Source Voltage Vgs	20V
	Maximum Operating Temperature	150°C
	Width	4.7mm
	Standards/Approvals	RoHS
	Length	10.41mm
	Height	9.01mm
	Automotive Standard	No

	모두 선택
	브랜드 Vishay
	Product Type Power MOSFET
	Channel Type Type N
	Maximum Continuous Drain Current Id 2.5A
	Maximum Drain Source Voltage Vds 500V
	Package Type TO-220AB
	Series IRF820
	Mount Type Through Hole
	Pin Count 3
	Maximum Drain Source Resistance Rds 3Ω
	Channel Mode Enhancement
	Typical Gate Charge Qg @ Vgs 24nC
	Minimum Operating Temperature -55°C
	Maximum Power Dissipation Pd 50W
	Forward Voltage Vf 1.6V
	Maximum Gate Source Voltage Vgs 20V
	Maximum Operating Temperature 150°C
	Width 4.7mm
	Standards/Approvals RoHS
	Length 10.41mm
	Height 9.01mm
	Automotive Standard No

Vishay IRF820 Series Power MOSFET, 500V Drain Source Voltage, 2.5A Continuous Drain Current - IRF820PBF

This power MOSFET is a high-voltage N-channel enhancement device designed for switching and amplification tasks in industrial electronics. It suits applications requiring elevated drain-source voltages and moderate continuous current, operating across a wide temperature span and mounted in a standard through-hole package for straightforward board assembly.

Features and Benefits:

• 500V drain-source rating enables high-voltage switching
• 2.5A continuous current supports moderate load handling
• 50W power dissipation allows sustained thermal performance
• 3 Ω on-resistance reduces conduction-related losses
• 24 nC typical gate charge yields predictable drive requirements
• Vgs ±20V tolerance protects gate from overvoltage events

Applications

• Suitable for SMPS primary-side switching in industrial supplies
• Ideal for linear amplifier stages requiring high-voltage transistors
• Used for motor-drive Interface circuits with moderate currents
• Can be used for high-voltage test rigs and laboratory power supplies
• Suitable for retrofit through-hole designs in control panels

What mounting approach does this device require?

It is supplied for through-hole assembly in a TO-220AB package, allowing conventional soldering and heatsinking options.

What thermal range can it tolerate during operation?

It can operate between -55 °C and 150 °C, permitting use in harsh ambient and elevated-junction scenarios.

How does gate drive impact switching behaviour?

The typical gate charge of 24 nC at rated gate voltage determines required driver current and switching-speed trade-offs.

What must be considered for power dissipation management?

With a 50W maximum dissipation, external heatsinking and mounting orientation are necessary to maintain safe junction temperatures at higher loads.

Are there specific electrical limits to observe at the gate?

The gate-source voltage must not exceed ±20V to avoid damaging the gate oxide and compromising device integrity.