Vishay IRF820 Type N-Channel Power MOSFET, 2.5 A, 500 V Enhancement, 3-Pin TO-220AB IRF820PBF

RS 제품 번호:: 178-0851
제조사 부품 번호:: IRF820PBF
제조업체:: Vishay

Vishay IRF820 Type N-Channel Power MOSFET, 2.5 A, 500 V Enhancement, 3-Pin TO-220AB IRF820PBF

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 tube of 50 units)*

₩77,000.00

400 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	Per Tube*
50 - 50	₩1,540.00	₩77,040.00
100 - 150	₩1,508.00	₩75,360.00
200 +	₩1,474.00	₩73,660.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 178-0851
제조사 부품 번호:: IRF820PBF
제조업체:: Vishay

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Vishay
	Channel Type	Type N
	Product Type	Power MOSFET
	Maximum Continuous Drain Current Id	2.5A
	Maximum Drain Source Voltage Vds	500V
	Package Type	TO-220AB
	Series	IRF820
	Mount Type	Through Hole
	Pin Count	3
	Maximum Drain Source Resistance Rds	3Ω
	Channel Mode	Enhancement
	Maximum Power Dissipation Pd	50W
	Maximum Gate Source Voltage Vgs	20V
	Typical Gate Charge Qg @ Vgs	24nC
	Forward Voltage Vf	1.6V
	Minimum Operating Temperature	-55°C
	Maximum Operating Temperature	150°C
	Length	10.41mm
	Standards/Approvals	RoHS
	Width	4.7mm
	Height	9.01mm
	Automotive Standard	No

	모두 선택
	브랜드 Vishay
	Channel Type Type N
	Product Type Power MOSFET
	Maximum Continuous Drain Current Id 2.5A
	Maximum Drain Source Voltage Vds 500V
	Package Type TO-220AB
	Series IRF820
	Mount Type Through Hole
	Pin Count 3
	Maximum Drain Source Resistance Rds 3Ω
	Channel Mode Enhancement
	Maximum Power Dissipation Pd 50W
	Maximum Gate Source Voltage Vgs 20V
	Typical Gate Charge Qg @ Vgs 24nC
	Forward Voltage Vf 1.6V
	Minimum Operating Temperature -55°C
	Maximum Operating Temperature 150°C
	Length 10.41mm
	Standards/Approvals RoHS
	Width 4.7mm
	Height 9.01mm
	Automotive Standard No

Vishay IRF820 Series Power MOSFET, 500V Drain-Source Voltage, 50W Power Dissipation - IRF820PBF

This power MOSFET is a high-voltage switching transistor designed for through-hole mounting in power conversion and control circuits. It operates as an N-channel enhancement device intended to switch or amplify high-voltage loads within electronic systems while meeting RoHS requirements.

Features and Benefits:

• 500V drain-source rating enables high-voltage switching capability
• 50W power dissipation supports sustained power handling
• 2.5A continuous drain current allows moderate load conduction
• 3Ω maximum RDS(on) reduces conduction losses under light loads
• 24nC typical gate charge permits reasonable switching speed control
• -55°C to 150°C operating range suits wide thermal environments

Applications

• Suitable for SMPS primary-side switching stages
• Ideal for high-voltage lamp and heater controllers
• Used with discrete motor-drive front-ends for low-current motors
• Can be used for hobbyist high-voltage power supplies
• Used for laboratory bench test rigs requiring rugged through-hole parts

What package and mounting method does it use?

The device is supplied in a TO-220AB package configured for through-hole fitting with three pins for straightforward PCB attachment and heatsinking.

What gate voltage limits must be observed to avoid damage?

The gate-source voltage must not exceed 20V in either polarity to prevent gate-oxide stress and potential failure.

How does the forward voltage specification affect its use in circuits?

The specified forward voltage of 1.6V indicates the typical voltage drop when conducting under specified test conditions and should be accounted for in thermal and efficiency calculations.

Is this component suitable for automotive temperature extremes?

While it tolerates -55°C to 150°C, it is not designated to meet automotive-standard qualifications.