Vishay IRF740 Type N-Channel Power MOSFET, 10 A, 400 V Enhancement, 3-Pin TO-220AB IRF740PBF

RS 제품 번호:: 178-0812
제조사 부품 번호:: IRF740PBF
제조업체:: Vishay

Vishay IRF740 Type N-Channel Power MOSFET, 10 A, 400 V Enhancement, 3-Pin TO-220AB IRF740PBF

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 tube of 50 units)*

₩94,770.00

추가로 2026년 6월 29일 부터 750 개 단위 배송
추가로 2026년 9월 25일 부터 1,000 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	Per Tube*
50 - 200	₩1,895.40	₩94,770.00
250 +	₩1,706.25	₩85,293.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 178-0812
제조사 부품 번호:: IRF740PBF
제조업체:: Vishay

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Vishay
	Channel Type	Type N
	Product Type	Power MOSFET
	Maximum Continuous Drain Current Id	10A
	Maximum Drain Source Voltage Vds	400V
	Series	IRF740
	Package Type	TO-220AB
	Mount Type	Through Hole
	Pin Count	3
	Maximum Drain Source Resistance Rds	550mΩ
	Channel Mode	Enhancement
	Forward Voltage Vf	2V
	Maximum Gate Source Voltage Vgs	20V
	Minimum Operating Temperature	-55°C
	Maximum Power Dissipation Pd	125W
	Typical Gate Charge Qg @ Vgs	63nC
	Maximum Operating Temperature	150°C
	Standards/Approvals	RoHS
	Width	4.7mm
	Height	9.01mm
	Length	10.41mm
	Automotive Standard	No

	모두 선택
	브랜드 Vishay
	Channel Type Type N
	Product Type Power MOSFET
	Maximum Continuous Drain Current Id 10A
	Maximum Drain Source Voltage Vds 400V
	Series IRF740
	Package Type TO-220AB
	Mount Type Through Hole
	Pin Count 3
	Maximum Drain Source Resistance Rds 550mΩ
	Channel Mode Enhancement
	Forward Voltage Vf 2V
	Maximum Gate Source Voltage Vgs 20V
	Minimum Operating Temperature -55°C
	Maximum Power Dissipation Pd 125W
	Typical Gate Charge Qg @ Vgs 63nC
	Maximum Operating Temperature 150°C
	Standards/Approvals RoHS
	Width 4.7mm
	Height 9.01mm
	Length 10.41mm
	Automotive Standard No

Vishay IRF740 Series Power MOSFET, 400V Drain Source Voltage, 10A Continuous Drain Current - IRF740PBF

This power MOSFET is a high-voltage N-channel enhancement device designed for use in industrial switching and power-control circuits. It operates across a wide temperature range and is supplied in a through-hole TO-220AB package suitable for assemblies where robust mounting and straightforward heat-sinking are required. The device is intended for applications demanding sustained current handling and elevated voltage tolerance.

Features and Benefits:

• 400V drain-source rating for high-voltage switching applications • 10A continuous drain current to support moderate power loads • 125W power dissipation for reliable thermal performance • 550mΩ RDS(on) enabling efficient conduction in switching roles • 63nC typical gate charge to inform drive requirements • 20V maximum gate-source voltage for gate-drive margin

Applications

• Suitable for switch-mode power supply primary switching • Ideal for motor-control inverter stages in automation systems • Used for high-voltage power converters in industrial equipment • Can be used for power management in test and measurement rigs

What mounting method does the device require for heat management?

It is a through-hole component in a TO-220AB package, allowing direct attachment to heatsinks using a fastener and insulating hardware if required.

What temperature extremes can it tolerate during operation?

The device is specified to operate down to -55°C and up to 150°C, making it suitable for a wide range of environmental conditions.

What should be considered when designing the gate drive?

The maximum gate-source voltage is 20V and the typical gate charge is 63nC at VGS, so the driver must supply sufficient charge and respect the 20V limit to avoid gate overstress.

Is the device compliant with common environmental material standards?

The component conforms to RoHS directives on restricted hazardous substances.