Vishay SI8824EDB Type N-Channel MOSFET, 2.1 A, 20 V, 4-Pin MICRO FOOT SI8824EDB-T2-E1

RS 제품 번호:: 256-7399
제조사 부품 번호:: SI8824EDB-T2-E1
제조업체:: Vishay

Vishay SI8824EDB Type N-Channel MOSFET, 2.1 A, 20 V, 4-Pin MICRO FOOT SI8824EDB-T2-E1

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 pack of 25 units)*

₩14,200.00

일시적 품절

2027년 1월 11일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	한팩당*
25 - 25	₩568.00	₩14,200.00
50 - 75	₩540.00	₩13,500.00
100 - 225	₩508.00	₩12,700.00
250 - 975	₩472.00	₩11,780.00
1000 +	₩434.00	₩10,860.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 256-7399
제조사 부품 번호:: SI8824EDB-T2-E1
제조업체:: Vishay

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Vishay
	Channel Type	Type N
	Product Type	MOSFET
	Maximum Continuous Drain Current Id	2.1A
	Maximum Drain Source Voltage Vds	20V
	Series	SI8824EDB
	Package Type	MICRO FOOT
	Mount Type	Surface
	Pin Count	4
	Maximum Drain Source Resistance Rds	0.175Ω
	Forward Voltage Vf	1.2V
	Minimum Operating Temperature	-55°C
	Maximum Power Dissipation Pd	0.9W
	Maximum Gate Source Voltage Vgs	5V
	Typical Gate Charge Qg @ Vgs	2.7nC
	Maximum Operating Temperature	+150°C
	Standards/Approvals	RoHS
	Height	0.402mm
	Automotive Standard	No

	모두 선택
	브랜드 Vishay
	Channel Type Type N
	Product Type MOSFET
	Maximum Continuous Drain Current Id 2.1A
	Maximum Drain Source Voltage Vds 20V
	Series SI8824EDB
	Package Type MICRO FOOT
	Mount Type Surface
	Pin Count 4
	Maximum Drain Source Resistance Rds 0.175Ω
	Forward Voltage Vf 1.2V
	Minimum Operating Temperature -55°C
	Maximum Power Dissipation Pd 0.9W
	Maximum Gate Source Voltage Vgs 5V
	Typical Gate Charge Qg @ Vgs 2.7nC
	Maximum Operating Temperature +150°C
	Standards/Approvals RoHS
	Height 0.402mm
	Automotive Standard No

Datasheet - SI8824EDB-T2-E1

Vishay SI8824EDB Series MOSFET, 20V Maximum Drain Source Voltage, 2.1A Maximum Continuous Drain Current - SI8824EDB-T2-E1

This n-channel MOSFET is a compact surface-mount switching transistor designed for low-voltage power management and fast switching tasks. It operates within extreme ambient ranges and is intended for use where a small footprint and logic-level gate drive are required. The device complies with RoHS and is supplied in a MICRO FOOT package suitable for high-density assemblies.

Features and Benefits:

• Low on-resistance 0.175Ω enables reduced conduction losses
• Continuous drain current 2.1A supports moderate load currents
• Gate threshold tuned for Vgs 5V logic-level compatibility
• Typical gate charge 2.7nC for rapid switching performance
• Maximum power dissipation 0.9W manages thermal load in compact layouts
• Forward voltage 1.2V aids in predicting conduction drop

Applications

• Suitable for battery-powered DC-DC converters in compact designs
• Ideal for high-density power distribution on SMD assemblies
• Used with microcontrollers requiring Vgs 5V switching
• Can be used for low-voltage motor drivers and load switches
• Appropriate for signal-level power control in consumer electronics

What thermal extremes can the device endure in operation?

It is rated to operate from -55°C up to +150°C, allowing use in demanding temperature environments.

How does the package affect board layout considerations?

The MICRO FOOT surface-mount format minimises vertical and lateral space, facilitating tight component placement and low-profile assemblies.

What electrical limit should designers observe for drain-source voltage?

The maximum drain-source voltage is 20V, so designs must keep system voltages below this threshold.

How does switching behaviour influence gate drive selection?

With a typical gate charge of 2.7nC, gate drivers must supply sufficient current for the desired edge rates without excessive losses.