Infineon 600V CoolMOS P7 Type N-Channel MOSFET, 26 A, 600 V Enhancement, 3-Pin TO-263

RS 제품 번호:: 214-4367
제조사 부품 번호:: IPB60R120P7ATMA1
제조업체:: Infineon

Infineon 600V CoolMOS P7 Type N-Channel MOSFET, 26 A, 600 V Enhancement, 3-Pin TO-263

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 reel of 1000 units)*

₩2,890,000.00

일시적 품절

2026년 10월 21일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	릴당*
1000 - 4000	₩2,890.00	₩2,890,400.00
5000 +	₩2,832.00	₩2,832,600.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 214-4367
제조사 부품 번호:: IPB60R120P7ATMA1
제조업체:: Infineon

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Infineon
	Channel Type	Type N
	Product Type	MOSFET
	Maximum Continuous Drain Current Id	26A
	Maximum Drain Source Voltage Vds	600V
	Series	600V CoolMOS P7
	Package Type	TO-263
	Mount Type	Surface
	Pin Count	3
	Maximum Drain Source Resistance Rds	120mΩ
	Channel Mode	Enhancement
	Forward Voltage Vf	0.9V
	Maximum Power Dissipation Pd	95W
	Typical Gate Charge Qg @ Vgs	36nC
	Minimum Operating Temperature	-55°C
	Maximum Operating Temperature	150°C
	Length	10.02mm
	Standards/Approvals	No
	Height	4.5mm
	Automotive Standard	No

	모두 선택
	브랜드 Infineon
	Channel Type Type N
	Product Type MOSFET
	Maximum Continuous Drain Current Id 26A
	Maximum Drain Source Voltage Vds 600V
	Series 600V CoolMOS P7
	Package Type TO-263
	Mount Type Surface
	Pin Count 3
	Maximum Drain Source Resistance Rds 120mΩ
	Channel Mode Enhancement
	Forward Voltage Vf 0.9V
	Maximum Power Dissipation Pd 95W
	Typical Gate Charge Qg @ Vgs 36nC
	Minimum Operating Temperature -55°C
	Maximum Operating Temperature 150°C
	Length 10.02mm
	Standards/Approvals No
	Height 4.5mm
	Automotive Standard No

Datasheet - IPB60R120P7ATMA1

Infineon 600V CoolMOS P7 Series MOSFET, 600V Drain Source Voltage, 26A Continuous Drain Current - IPB60R120P7ATMA1

This MOSFET is a high-voltage N-channel enhancement device designed for switching and power-conversion tasks in demanding thermal environments. It operates across an extended temperature range and is intended for surface-mount assembly in power electronic circuits where high-voltage blocking and significant continuous current capability are required.

Features and Benefits:

• 600V drain voltage enables high-voltage system designs
• 26A continuous current supports robust load handling
• 120mΩ Rds(on) reduces conduction losses during operation
• 36nC typical gate charge allows predictable drive sizing
• 95W maximum power dissipation permits elevated power throughput
• 0.9V forward voltage limits diode drop in synchronous circuits

Applications

• Suitable for offline switch-mode power supplies
• Ideal for resonant and hard-switching converters
• Used with high-voltage motor-drive front ends
• Can be used for auxiliary power rails in industrial equipment
• Appropriate for high-temperature electronics cabinets

What package type does it use for board mounting?

It is supplied in a TO-263 package configured for surface mounting, facilitating thermal conduction to a PCB land pattern.

How does the device tolerate extreme temperatures in operation?

It is specified to function from -55°C up to 150°C, allowing use in environments with wide thermal swings.

What gate drive limitations should I observe?

The maximum gate-to-source voltage rating is 20V, so drive circuits must remain within this threshold to avoid gate damage.

What switching behaviour impacts layout decisions?

The device’s typical gate charge of 36nC and its Rds(on) value influence gate-driver current needs and copper width for minimising I2R losses.