Infineon SIPMOS Type P-Channel MOSFET, 330 mA, 60 V Enhancement, 3-Pin SOT-23

RS 제품 번호:: 145-8801
제조사 부품 번호:: BSS83PH6327XTSA1
제조업체:: Infineon

Infineon SIPMOS Type P-Channel MOSFET, 330 mA, 60 V Enhancement, 3-Pin SOT-23

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 reel of 3000 units)*

₩432,000.00

추가로 2026년 8월 24일 부터 33,000 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	릴당*
3000 - 12000	₩144.00	₩430,800.00
15000 +	₩130.00	₩387,600.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 145-8801
제조사 부품 번호:: BSS83PH6327XTSA1
제조업체:: Infineon

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Infineon
	Product Type	MOSFET
	Channel Type	Type P
	Maximum Continuous Drain Current Id	330mA
	Maximum Drain Source Voltage Vds	60V
	Package Type	SOT-23
	Series	SIPMOS
	Mount Type	Surface
	Pin Count	3
	Maximum Drain Source Resistance Rds	3Ω
	Channel Mode	Enhancement
	Maximum Power Dissipation Pd	360mW
	Minimum Operating Temperature	-55°C
	Typical Gate Charge Qg @ Vgs	2.38nC
	Forward Voltage Vf	-1.1V
	Maximum Operating Temperature	150°C
	Length	2.9mm
	Standards/Approvals	No
	Height	1mm
	Automotive Standard	AEC-Q101

	모두 선택
	브랜드 Infineon
	Product Type MOSFET
	Channel Type Type P
	Maximum Continuous Drain Current Id 330mA
	Maximum Drain Source Voltage Vds 60V
	Package Type SOT-23
	Series SIPMOS
	Mount Type Surface
	Pin Count 3
	Maximum Drain Source Resistance Rds 3Ω
	Channel Mode Enhancement
	Maximum Power Dissipation Pd 360mW
	Minimum Operating Temperature -55°C
	Typical Gate Charge Qg @ Vgs 2.38nC
	Forward Voltage Vf -1.1V
	Maximum Operating Temperature 150°C
	Length 2.9mm
	Standards/Approvals No
	Height 1mm
	Automotive Standard AEC-Q101

Infineon SIPMOS Series MOSFET, 60V Maximum Drain Source Voltage, 3Ω Maximum Drain Source Resistance - BSS83PH6327XTSA1

This p-channel MOSFET is a surface-mount switching transistor designed for compact power-control roles in electronic assemblies. It operates as an enhancement-mode device suitable for low-current switching in systems that demand a wide operating temperature range and compatibility with automotive-grade requirements.

Features and Benefits:

• 60V drain-source rating enables higher-voltage switching applications
• 3Ω maximum Rds reduces conduction losses during on-state
• 330mA continuous drain current supports small-signal switching
• 2.38nC typical gate charge yields faster gate transitions
• 20V maximum gate-source voltage allows flexible gate drive levels
• AEC-Q101 qualification ensures suitability for automotive electronics

Applications

• Suitable for battery-management and load-disconnect circuits
• Ideal for signal switching in automotive sensor interfaces
• Used with low-power regulator and power-rail switching stages
• Can be used for polarity-reverse protection in compact devices
• Suitable for surface-mount prototypes and dense PCB layouts

What thermal extremes can the device tolerate in real-world use?

It is specified to operate from -55°C up to 150°C, enabling use in both cold-start and high-temperature environments without derating of basic functionality.

How does the package influence board-level assembly and layout?

The SOT-23 surface-mount package is compact and suited to automated placement, permitting tight component spacing and simplified thermal conduction to the PCB.

What power dissipation should designers expect under normal conditions?

The device has a maximum power dissipation of 360mW, which should be accounted for in thermal calculations and thermal pad design to prevent overheating.

How does the component’s gate charge affect switching performance?

A typical gate charge of 2.38nC minimises required gate-drive energy, improving switching speed and reducing driver current for low-frequency or pulse applications.