Carlo Gavazzi Power Factor Monitoring Relay, 3 Phase, SPDT, DIN Rail
- RS 제품 번호:
- 857-7280
- 제조사 부품 번호:
- DWB01CM4810A
- 제조업체:
- Carlo Gavazzi
Subtotal (1 unit)*
₩310,030.80
재고있음
- 6 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩310,030.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 857-7280
- 제조사 부품 번호:
- DWB01CM4810A
- 제조업체:
- Carlo Gavazzi
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Carlo Gavazzi | |
| Monitoring Application | Power Factor | |
| Electrical Phase | 3 | |
| Contact Configuration | SPDT | |
| Mounting Type | DIN Rail | |
| Maximum Current Sensed | 5 A, 10A | |
| Time Delay | 1 → 30s | |
| Series | DWB01 | |
| Height | 80mm | |
| Length | 99.5mm | |
| Current Range | Maximum of 10 A, Maximum of 5A | |
| Dimensions | 99.5 x 45 x 80mm | |
| Width | 45mm | |
| Minimum Operating Temperature | -20°C | |
| 모두 선택 | ||
|---|---|---|
브랜드 Carlo Gavazzi | ||
Monitoring Application Power Factor | ||
Electrical Phase 3 | ||
Contact Configuration SPDT | ||
Mounting Type DIN Rail | ||
Maximum Current Sensed 5 A, 10A | ||
Time Delay 1 → 30s | ||
Series DWB01 | ||
Height 80mm | ||
Length 99.5mm | ||
Current Range Maximum of 10 A, Maximum of 5A | ||
Dimensions 99.5 x 45 x 80mm | ||
Width 45mm | ||
Minimum Operating Temperature -20°C | ||
- COO (Country of Origin):
- IT
3 Phase Load Guard Monitoring Relay
Carlo Gavazzi DWB01 & PWB01 series of precise TRMS power factor monitoring relays deisgned for use with 3 phase systems. Suitable for monitoring the actual load of asynchronous & symmetrical loads where proportional load & power factor is present. DWP01 & PWB01 series of monitoring relays feature a start/stop input allowing use of a manual switch to control the motor without any auxiliary device.
Another great feature of the DWB01 & PWB01 series is a latch function which enables the relays to be kept energised even after the alarm has finished
Another great feature of the DWB01 & PWB01 series is a latch function which enables the relays to be kept energised even after the alarm has finished
DIN rail (DWB01 series) and plug-in module (PWB01 series) variants available
TRMS load guard relays for 3 phase balanced applications
Power factor measurement within set parameters
Programmable latching or inhibit features
1 - 30 Seconds knob adjustable power ON delay
LEDs for relay, alarm & power indication
TRMS load guard relays for 3 phase balanced applications
Power factor measurement within set parameters
Programmable latching or inhibit features
1 - 30 Seconds knob adjustable power ON delay
LEDs for relay, alarm & power indication
관련된 링크들
- Carlo Gavazzi Power Factor Monitoring Relay, 3 Phase, SPDT, DIN Rail
- Carlo Gavazzi Current Monitoring Relay, 1 Phase, SPDT
- Carlo Gavazzi Phase Monitoring Relay, 3 Phase, SPDT
- Carlo Gavazzi Voltage Monitoring Relay, 3 Phase, SPDT, DIN Rail
- Carlo Gavazzi Voltage Monitoring Relay, 3 Phase, SPDT, Plug In
- Carlo Gavazzi Current Monitoring Relay, 1 Phase, SPDT, DIN Rail
- Carlo Gavazzi Phase Monitoring Relay, 3 Phase, SPDT, 177 → 550V ac, DIN Rail
- Carlo Gavazzi Phase, Voltage Monitoring Relay, 3 Phase, SPDT, 177 → 475V ac, DIN Rail