Carlo Gavazzi Monitoring Relay, SPDT, DIN Rail
- RS 제품 번호:
- 859-3080
- 제조사 부품 번호:
- DWA01CM485A
- 제조업체:
- Carlo Gavazzi
Subtotal (1 unit)*
₩285,889.50
재고있음
- 2 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩285,889.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 859-3080
- 제조사 부품 번호:
- DWA01CM485A
- 제조업체:
- Carlo Gavazzi
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Carlo Gavazzi | |
| Product Type | Monitoring Relay | |
| Contact Configuration | SPDT | |
| Mount Type | DIN Rail | |
| Power Consumption | 13VA | |
| Terminal Type | Screw | |
| IP Rating | IP20 | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 60°C | |
| Height | 80mm | |
| Length | 99.5mm | |
| Series | DWA01 | |
| Width | 22.5mm | |
| Standards/Approvals | CE marking, CSA, L.V. Directive 2006/95/EC, EN 60255-6, UL, EMC Directive 2004/108/EC | |
| 모두 선택 | ||
|---|---|---|
브랜드 Carlo Gavazzi | ||
Product Type Monitoring Relay | ||
Contact Configuration SPDT | ||
Mount Type DIN Rail | ||
Power Consumption 13VA | ||
Terminal Type Screw | ||
IP Rating IP20 | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 60°C | ||
Height 80mm | ||
Length 99.5mm | ||
Series DWA01 | ||
Width 22.5mm | ||
Standards/Approvals CE marking, CSA, L.V. Directive 2006/95/EC, EN 60255-6, UL, EMC Directive 2004/108/EC | ||
제외
- COO (Country of Origin):
- IT
3 Phase Load Guard Monitoring Relay
Carlo Gavazzi DWB01 & PWB01 series of precise TRMS power factor monitoring relays deisgned for use with 3 phase systems. Suitable for monitoring the actual load of asynchronous & symmetrical loads where proportional load & power factor is present. DWP01 & PWB01 series of monitoring relays feature a start/stop input allowing use of a manual switch to control the motor without any auxiliary device.
Another great feature of the DWB01 & PWB01 series is a latch function which enables the relays to be kept energised even after the alarm has finished
DIN rail (DWB01 series) and plug-in module (PWB01 series) variants available
TRMS load guard relays for 3 phase balanced applications
Power factor measurement within set parameters
Programmable latching or inhibit features
1 - 30 Seconds knob adjustable power ON delay
LEDs for relay, alarm & power indication
관련된 링크들
- Carlo Gavazzi Monitoring Relay, 3 Phase, SPDT, DIN Rail to 10A
- Carlo Gavazzi Monitoring Relay, SPDT, DIN Rail, 24V ac, 240 V ac 24 V dc
- Carlo Gavazzi Monitoring Relay, 1 Phase, SPDT, 230V ac
- Carlo Gavazzi Monitoring Relay, 1 Phase, SPDT, DIN Rail
- Carlo Gavazzi Monitoring Relay, 24/240 V ac Monitor Range, SPDT, DIN Rail, 24V ac, 240 V ac
- Carlo Gavazzi Monitoring Relay, 1 Phase, SPDT, DIN Rail, 18V ac, 265 V ac
- Carlo Gavazzi Monitoring Relay, 3 Phase, -20 V ac Monitor Range, SPDT, DIN Rail, 208V ac, 480 V ac
- Carlo Gavazzi Monitoring Relay, 1 Phase, SPDT, DIN Rail, 0.1A to 5A, 24 V dc, 24 V, 48V ac