ABB Current Monitoring Relay, 1 Phase, DPDT, DIN Rail
- RS 제품 번호:
- 775-8015
- 제조사 부품 번호:
- 1SVR730841R1400 CM-SRS.21S
- 제조업체:
- ABB
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
Subtotal (1 unit)*
₩352,330.80
재고있음
- 2 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩352,330.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 775-8015
- 제조사 부품 번호:
- 1SVR730841R1400 CM-SRS.21S
- 제조업체:
- ABB
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | ABB | |
| Monitoring Application | Current | |
| Electrical Phase | 1 | |
| Contact Configuration | DPDT | |
| Mounting Type | DIN Rail | |
| Minimum Current Sensed | 0.1 A, 3 mA, 10mA | |
| Maximum Current Sensed | 1 A, 30 mA, 100mA | |
| Current Sensitivity | Overcurrent, Undercurrent | |
| Time Delay | 0 s, 0.1 → 30s | |
| Frequency Sensing Range | 50 → 60Hz | |
| Series | CM-SRS | |
| Maximum Operating Temperature | +60°C | |
| Height | 85.6mm | |
| Length | 103.7mm | |
| Operating Temperature Range | +60°C | |
| Dimensions | 103.7 x 22.5 x 85.6mm | |
| Current Range | 0.1 → 1 A, 10 → 100 mA, 3 → 30mA | |
| Terminal Type | Screw | |
| Minimum Operating Temperature | -20°C | |
| Width | 22.5mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 ABB | ||
Monitoring Application Current | ||
Electrical Phase 1 | ||
Contact Configuration DPDT | ||
Mounting Type DIN Rail | ||
Minimum Current Sensed 0.1 A, 3 mA, 10mA | ||
Maximum Current Sensed 1 A, 30 mA, 100mA | ||
Current Sensitivity Overcurrent, Undercurrent | ||
Time Delay 0 s, 0.1 → 30s | ||
Frequency Sensing Range 50 → 60Hz | ||
Series CM-SRS | ||
Maximum Operating Temperature +60°C | ||
Height 85.6mm | ||
Length 103.7mm | ||
Operating Temperature Range +60°C | ||
Dimensions 103.7 x 22.5 x 85.6mm | ||
Current Range 0.1 → 1 A, 10 → 100 mA, 3 → 30mA | ||
Terminal Type Screw | ||
Minimum Operating Temperature -20°C | ||
Width 22.5mm | ||
- COO (Country of Origin):
- DE
CM-SRS Current Monitoring, Single Phase AC/DC
Depending on the configuration, the current monitoring relays CM-SRS.1 and CM-SRS.2 can be used for over- or undercurrent monitoring in single-phase AC and/or DC systems. The current to be monitored (measured value) is applied to terminals B1/B2/B3-C. The devices work according the open-circuit principle.
If the measured value exceeds resp. drops below the adjusted threshold value, the output relay(s) energize(s): on the CM-SRS.1 immediately, on the CM-SRS.2 after the set tripping delay TV.
Monitoring of DC- and AC-currents: CM-SRS.x1: 3mA - 1A and CM-SRS.x2: 0.3-15A
RMS measuring principle
One device includes 3 measuring ranges
Over- or undercurrent monitoring configurable
Hysteresis adjustable from 3-30%
Tripping delay TV adjustable 0.1-30s
CM-SRS.1: 1 c/o contact
CM-SRS.2: 2 c/o contacts
22.5mm width
3 LED's for status indication
RMS measuring principle
One device includes 3 measuring ranges
Over- or undercurrent monitoring configurable
Hysteresis adjustable from 3-30%
Tripping delay TV adjustable 0.1-30s
CM-SRS.1: 1 c/o contact
CM-SRS.2: 2 c/o contacts
22.5mm width
3 LED's for status indication
관련된 링크들
- ABB Current Monitoring Relay, 1 Phase, DPDT, DIN Rail
- ABB Current Monitoring Relay, 1 Phase, SPDT
- ABB Current Monitoring Relay, 1 Phase, SPDT, DIN Rail
- ABB Phase Monitoring Relay, 3 Phase, DPDT
- ABB Phase Monitoring Relay, 3 Phase, DPDT, DIN Rail
- ABB Phase, Voltage Monitoring Relay, 3 Phase, DPDT, 180 → 280V ac, DIN Rail
- ABB Voltage Monitoring Relay, 1 Phase, DPDT, DIN Rail
- ABB Temperature Monitoring Relay, 1 Phase, DPDT, DIN Rail