ABB Monitoring Relay, 1 Phase, DPDT, DIN Rail, 0.1mA to 100mA, 240 V dc, 240V ac

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Monitoring Relays 열람하기
현재 비가용
RS는 이 제품을 더 이상 판매하지 않습니다.
RS 제품 번호:
775-7996
제조사 부품 번호:
1SVR730841R0400 CM-SRS.21S
제조업체:
ABB
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

ABB

Product Type

Monitoring Relay

Electrical Phase

1

Contact Configuration

DPDT

Mount Type

DIN Rail

Minimum Current Sensed

0.1mA

Power Consumption

0.75W

Maximum Current Sensed

100mA

Switching Voltage

240V

Current Sensitivity

Overcurrent, Undercurrent

Terminal Type

Screw

IP Rating

IP20

Supply DC Voltage

240 V dc

Minimum Operating Temperature

-20°C

Supply AC Voltage

240V ac

Maximum Operating Temperature

60°C

Height

85.6mm

Length

103.7mm

Series

CM-SRS

Width

22.5mm

Standards/Approvals

RoHS

COO (Country of Origin):
DE

CM-SRS Current Monitoring, Single Phase AC/DC


Depending on the configuration, the current monitoring relays CM-SRS.1 and CM-SRS.2 can be used for over- or undercurrent monitoring in single-phase AC and/or DC systems. The current to be monitored (measured value) is applied to terminals B1/B2/B3-C. The devices work according the open-circuit principle.

If the measured value exceeds resp. drops below the adjusted threshold value, the output relay(s) energize(s): on the CM-SRS.1 immediately, on the CM-SRS.2 after the set tripping delay TV.

Monitoring of DC- and AC-currents: CM-SRS.x1: 3mA - 1A and CM-SRS.x2: 0.3-15A

RMS measuring principle

One device includes 3 measuring ranges

Over- or undercurrent monitoring configurable

Hysteresis adjustable from 3-30%

Tripping delay TV adjustable 0.1-30s

CM-SRS.1: 1 c/o contact

CM-SRS.2: 2 c/o contacts

22.5mm width

3 LED's for status indication

관련된 링크들