ABB Monitoring Relay, 1 Phase, SPDT, DIN Rail, 0.1mA to 100mA, 240 V dc, 240V ac
- RS 제품 번호:
- 775-7977
- 제조사 부품 번호:
- 1SVR730840R0200 CM-SRS.11S
- 제조업체:
- ABB
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
Subtotal (1 unit)*
₩366,463.50
재고있음
- 추가로 2026년 5월 19일 부터 2 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩366,463.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 775-7977
- 제조사 부품 번호:
- 1SVR730840R0200 CM-SRS.11S
- 제조업체:
- ABB
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | ABB | |
| Product Type | Monitoring Relay | |
| Electrical Phase | 1 | |
| Contact Configuration | SPDT | |
| Mount Type | DIN Rail | |
| Minimum Current Sensed | 0.1mA | |
| Switching Voltage | 240V | |
| Maximum Current Sensed | 100mA | |
| Power Consumption | 0.75W | |
| Current Sensitivity | Undercurrent, Overcurrent | |
| Terminal Type | Screw | |
| IP Rating | IP20 | |
| Minimum Operating Temperature | -20°C | |
| Supply DC Voltage | 240 V dc | |
| Supply AC Voltage | 240V ac | |
| Maximum Operating Temperature | 60°C | |
| Width | 22.5mm | |
| Standards/Approvals | RoHS | |
| Length | 103.7mm | |
| Series | CM-SRS | |
| Height | 85.6mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 ABB | ||
Product Type Monitoring Relay | ||
Electrical Phase 1 | ||
Contact Configuration SPDT | ||
Mount Type DIN Rail | ||
Minimum Current Sensed 0.1mA | ||
Switching Voltage 240V | ||
Maximum Current Sensed 100mA | ||
Power Consumption 0.75W | ||
Current Sensitivity Undercurrent, Overcurrent | ||
Terminal Type Screw | ||
IP Rating IP20 | ||
Minimum Operating Temperature -20°C | ||
Supply DC Voltage 240 V dc | ||
Supply AC Voltage 240V ac | ||
Maximum Operating Temperature 60°C | ||
Width 22.5mm | ||
Standards/Approvals RoHS | ||
Length 103.7mm | ||
Series CM-SRS | ||
Height 85.6mm | ||
- COO (Country of Origin):
- DE
CM-SRS Current Monitoring, Single Phase AC/DC
Depending on the configuration, the current monitoring relays CM-SRS.1 and CM-SRS.2 can be used for over- or undercurrent monitoring in single-phase AC and/or DC systems. The current to be monitored (measured value) is applied to terminals B1/B2/B3-C. The devices work according the open-circuit principle.
If the measured value exceeds resp. drops below the adjusted threshold value, the output relay(s) energize(s): on the CM-SRS.1 immediately, on the CM-SRS.2 after the set tripping delay TV.
Monitoring of DC- and AC-currents: CM-SRS.x1: 3mA - 1A and CM-SRS.x2: 0.3-15A
RMS measuring principle
One device includes 3 measuring ranges
Over- or undercurrent monitoring configurable
Hysteresis adjustable from 3-30%
Tripping delay TV adjustable 0.1-30s
CM-SRS.1: 1 c/o contact
CM-SRS.2: 2 c/o contacts
22.5mm width
3 LED's for status indication
관련된 링크들
- ABB Monitoring Relay, 1 Phase, SPDT, DIN Rail, 0.3A to 15A, 240 V dc, 240V ac
- ABB Monitoring Relay, 1 Phase, DPDT, DIN Rail, 0.1mA to 100mA, 240 V dc, 240V ac
- ABB Monitoring Relay, 1 Phase, SPDT, DIN Rail, 3mA to 30mA, 220V ac, 240 V ac
- ABB Monitoring Relay, 1 Phase, DPDT, DIN Rail, 0.3A to 15A, 240 V dc, 240V ac
- ABB Monitoring Relay, 1, 3 Phase, SPDT, DIN Rail, 240V ac 240 V dc
- ABB Monitoring Relay, 3, 1 Phase, SPDT, DIN Rail, 240V ac 240 V dc
- ABB Monitoring Relay, 3 Phase, SPDT, DIN Rail, 24 V dc 24/240 V ac
- ABB Monitoring Relay, 1 Phase, 2 CO, DIN Rail, 24 V dc, 24V ac