KEMET 47 nF Multilayer Ceramic Capacitor, 16V dc, ±5 %, Surface Mount
- RS 제품 번호:
- 161-1555
- 제조사 부품 번호:
- C0805X473J4JACAUTO
- 제조업체:
- KEMET
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 10 units)*
₩4,992.00
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 - 620 | ₩499.20 | ₩4,992.00 |
| 630 - 1240 | ₩487.50 | ₩4,875.00 |
| 1250 + | ₩477.75 | ₩4,777.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 161-1555
- 제조사 부품 번호:
- C0805X473J4JACAUTO
- 제조업체:
- KEMET
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | KEMET | |
| Capacitance | 47nF | |
| Product Type | Multilayer Ceramic Capacitor | |
| Voltage | 16V dc | |
| Package/Case | 0805 | |
| Construction | Stacked | |
| Packaging | Tape & Reel | |
| Mount Type | Surface Mount | |
| Dielectric | U2J | |
| Tolerance | ±5 % | |
| Automotive Standard | AEC-Q200 | |
| Termination Type | Solder | |
| Minimum Operating Temperature | -55°C | |
| Series | U2J X FT-CAP | |
| Standards/Approvals | EIA 481, EIA 0805, EIA 556, IPC-7351, J-STD-020, EIA 1206, EIA 0603, EIA 624 | |
| Height | 1.25mm | |
| Length | 2mm | |
| Width | 1.25mm | |
| Maximum Operating Temperature | 125°C | |
| 모두 선택 | ||
|---|---|---|
브랜드 KEMET | ||
Capacitance 47nF | ||
Product Type Multilayer Ceramic Capacitor | ||
Voltage 16V dc | ||
Package/Case 0805 | ||
Construction Stacked | ||
Packaging Tape & Reel | ||
Mount Type Surface Mount | ||
Dielectric U2J | ||
Tolerance ±5 % | ||
Automotive Standard AEC-Q200 | ||
Termination Type Solder | ||
Minimum Operating Temperature -55°C | ||
Series U2J X FT-CAP | ||
Standards/Approvals EIA 481, EIA 0805, EIA 556, IPC-7351, J-STD-020, EIA 1206, EIA 0603, EIA 624 | ||
Height 1.25mm | ||
Length 2mm | ||
Width 1.25mm | ||
Maximum Operating Temperature 125°C | ||
- COO (Country of Origin):
- MX
KEMET’s Flexible Termination (FT-CAP) Multilayer Ceramic Capacitor in U2J dielectric incorporates a unique, flexible termination system that is integrated with KEMET’s standard termination materials. A conductive silver epoxy is utilized between the base metal and nickel barrier layers of KEMET’s standard termination system in order to establish pliability while maintaining Terminal strength, solderability and electrical performance.
AEC–Q200 automotive qualified
Low dissipation factor DF < 0.1%
Low noise solution similar to C0G
Low ESR and ESL
High thermal stability
High ripple current capability
Preferred capacitance solution at line frequencies and into the MHz range
Retains over 99% of nominal capacitance at full rated voltage
Small predictable and linear capacitance change with respect to temperature
관련된 링크들
- KEMET 47 nF Multilayer Ceramic Capacitor, 16 V dc, ±5 %, Surface Mount
- KEMET 47 nF Multilayer Ceramic Capacitor, 25 V dc, ±5 %, Surface Mount
- KEMET 47 nF Multilayer Ceramic Capacitor, 250 V dc, ±10 %, Surface Mount
- KEMET 47 nF Multilayer Ceramic Capacitor, 100 V dc, ±10 %, Surface Mount
- KEMET 47 nF Multilayer Ceramic Capacitor, 50V dc, ±10 %, Surface Mount
- KEMET 47 nF Multilayer Ceramic Capacitor, 50 V dc, ±10 %, Surface Mount
- KEMET 47 nF Multilayer Ceramic Capacitor, 200 V dc, ±5 %, Surface Mount
- KEMET 47 nF Multilayer Ceramic Capacitor, 50 V dc, ±5 %, Surface Mount