Name: Time Electronics 7007 Loop Calibrator Battery
Brand: Time Electronics
SKU: 537-2603
Price: 649822.00 KRW
Availability: InStock

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Time Electronics
	Product Type	Loop Calibrator
	Accuracy	±0.05 %
	Model Number	7007
	Battery Life	40h
	Power Source	Battery
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	50°C
	Standards/Approvals	No
	Weight	200g
	Length	30mm
	Height	140mm
	Width	65 mm
	Hazardous Area Certification	No

	모두 선택
	브랜드 Time Electronics
	Product Type Loop Calibrator
	Accuracy ±0.05 %
	Model Number 7007
	Battery Life 40h
	Power Source Battery
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 50°C
	Standards/Approvals No
	Weight 200g
	Length 30mm
	Height 140mm
	Width 65 mm
	Hazardous Area Certification No

제외

COO (Country of Origin):: GB

Loop-Mate2 is a dedicated loop signal indicator and just as easy to operate. It functions as RX Sim or TX Test and the loop types are 4 - 20mA, or 0 - 10V. Display is in direct units, or % of span, and accuracy is 0.05%. It also has its own internal loop supply.

RxSim and TxTest

Time Electronics Loop-Mate 1 & 2 Current Loop Calibrator

Loop-mates designed for the calibration, testing and measurement of process loops are pocket sized units that boast a simplistic operation, no complicated selections just grab and go.

Loop-Mate 1 (537-2580) - Simulator which acts as a source in providing loop signals, a simple up and down button allows the user to increase or decrease the signal.

7 set points: 10%, 25%, 50%, 75%, 90% and 100% each of which is shown on LED's with beeps. The Loop-Mate 1 when used in conjunction with Loop-Mate 2 allows users to check a signal has arrived within specification at another location.

Loop-Mate 2 (537-2603) - Signal indicator with a 4-20 mA or 0-10 V loop type selection, also allowing the user to choose between a display of direct units or % of span. Also, specifically designed so that the LCD display shows the signal in mA, V, or % of span within an accuracy of 0.05%.

Powered by a PP3 battery both units provide up to 40 hours of continuous use, making them the ideal addition to any engineer testing kit.

Features and Benefits Loop-Mate 1:

• 0.1% Accuracy

• TxSim or RxTest mode

• 25 mA max loop supply

• 140 x 65 x 30 mm dimensions

Features and Benefits Loop-Mate 2:

• 4-digit LCD display

• 0.05% accuracy

• RxSim, TxTest, 50mA/50V measure

• 140 x 65 x 30 mm dimensions

FAQ's

What is a current loop calibrator?

Current loop calibrators are specially designed instruments for current loop trouble shooting, testing and calibration. They can source current on unpowered devices in a loop, simulate the operation of loop powered transmitters and also measure current. These calibrators often feature time saving technology, specialist graphics using digital interfaces and micro-processor based electronics.

How much current flows in each loop of a parallel circuit?

Determined by Ohm's law, which states that the current between 2 points through a conductor is directly proportionate to the voltage across those 2 points, divided by the resistance of the conductor. I = V/R. This is also the case for series and parallel circuits, however in parallel circuits the total current can be affected by the way the resistors have been connected, as well as their ohmic value. Current does divide up and there can be more current in one area over another nonetheless when all areas are added up the total amount is the same.

Note

Loop-Mate 1 is a simulator
Loop-Mate 2 is an indicator

Supplied with

Carry case, leads and technical manual

Time Electronics 7007 Loop Calibrator Battery