Omron D4n Series Roller Lever Limit Switch, 2 NC, IP67, Plastic Housing, 240V, 10A

RS 제품 번호:: 214-6724
제조사 부품 번호:: D4N-4B20
제조업체:: Omron

Omron D4n Series Roller Lever Limit Switch, 2 NC, IP67, Plastic Housing, 240V, 10A

Subtotal (1 unit)*

₩58,266.00

추가로 2026년 5월 04일 부터 6 개 단위 배송
추가로 2026년 8월 11일 부터 17 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩58,266.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 214-6724
제조사 부품 번호:: D4N-4B20
제조업체:: Omron

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Omron
	Product Type	Limit Switch
	Actuator Type	Roller Lever
	IP Rating	IP67
	Contact Configuration	2 NC
	Housing Material	Plastic
	Contact Type	Slow Action
	Terminal Type	Screw
	Switching Current	10A
	Series	D4n
	Switching DC Voltage	250V
	Minimum Operating Temperature	-30°C
	Switching AC Voltage	240V
	Maximum Operating Temperature	+70°C
	Depth	30mm
	Standards/Approvals	CCC, CE, CSA, RoHS, UL
	Width	50mm
	Length	72mm
	Hazardous Area Certification	No
	Mechanical Life	15000000Cycles
	Conduit Entry	M20
	Operating Force	6.4N
	Mounting Orientation	Multi Directional

	모두 선택
	브랜드 Omron
	Product Type Limit Switch
	Actuator Type Roller Lever
	IP Rating IP67
	Contact Configuration 2 NC
	Housing Material Plastic
	Contact Type Slow Action
	Terminal Type Screw
	Switching Current 10A
	Series D4n
	Switching DC Voltage 250V
	Minimum Operating Temperature -30°C
	Switching AC Voltage 240V
	Maximum Operating Temperature +70°C
	Depth 30mm
	Standards/Approvals CCC, CE, CSA, RoHS, UL
	Width 50mm
	Length 72mm
	Hazardous Area Certification No
	Mechanical Life 15000000Cycles
	Conduit Entry M20
	Operating Force 6.4N
	Mounting Orientation Multi Directional

Omron D4n Series Limit Switch, IP67, 10A Switching Current - D4N-4B20

This limit switch is a Compact actuator device designed for sensing position and interrupting circuits in industrial automation environments. It employs a roller lever actuator with a sealed plastic enclosure to operate reliably in machinery and control systems where dust or temporary water immersion may occur, and is intended for multi-directional mounting with screw Terminal connections and M20 conduit compatibility.

Features & Benefits

• IP67 sealed enclosure for protection against dust and immersion
• 2NC slow-action contacts for direct-opening safety compliance
• Rated for 10A at 240V AC to handle standard control loads
• Mechanical durability of 15,000,000 cycles for long service life
• Operating force of 6.4N enables consistent actuation response
• Operating range −30°C to +70°C for wide ambient conditions

Applications

• Suitable for conveyor end-of-travel detection in factories
• Ideal for machine-tool limit sensing and safety interlocks
• used with lift door-position monitoring and control circuits
• Can be used for robotics joint endstop feedback systems
• Suitable for assembly-line stop/start triggers and guards

What Terminal and wiring options are available for installation?

The unit uses screw-type terminals compatible with AWG20 to AWG18 conductors and accepts M20 conduit entry for secure cable routing.

How does the contact arrangement affect safety-oriented use?

The slow-action contact form includes direct-opening NC contacts to separate contacts positively when metal deposition occurs, supporting approved direct-opening behaviour.

What electrical endurance can be expected under resistive loads?

Electrical life is specified at a minimum of 500,000 operations for a 3A resistive load at 250VAC and 300,000 operations for a 10A resistive load at 250VAC.

Are there environmental or mounting cautions to observe?

Mounting should maintain the head free from continuous splashes and foreign material, and conduit fittings must be tightened to specified torque to preserve the IP67 rating.

What mechanical limits apply to actuator reversal and movement?

The lever reversal force is limited to 6.4N with a typical movement until reversal of approximately 55° as measured on lever-type actuators.