Telemecanique Sensors XCMH Series Roller Plunger Limit Switch, 1 NO/1 NC, IP66, IP67, Plastic Housing, 240V ac, 0.75A

RS 제품 번호:: 194-147
제조사 부품 번호:: XCMH2121L1
제조업체:: Telemecanique Sensors

Telemecanique Sensors XCMH Series Roller Plunger Limit Switch, 1 NO/1 NC, IP66, IP67, Plastic Housing, 240V ac, 0.75A

Subtotal (1 unit)*

₩105,700.00

9 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩105,700.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 194-147
제조사 부품 번호:: XCMH2121L1
제조업체:: Telemecanique Sensors

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Telemecanique Sensors
	Actuator Type	Roller Plunger
	Product Type	Limit Switch
	Contact Configuration	1 NO/1 NC
	IP Rating	IP66, IP67
	Housing Material	Plastic
	Contact Type	Snap Action
	Terminal Type	Cable
	Switching Current	0.75A
	Series	XCMH
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	240V ac
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	70°C
	Length	16mm
	Width	30mm
	Standards/Approvals	CSA C22.2 No 14, IEC 60204-1, IEC 60947-5-1, UL 508
	Depth	79mm
	Hazardous Area Certification	No
	Mechanical Life	5000000Cycles
	Operating Force	12.5N

	모두 선택
	브랜드 Telemecanique Sensors
	Actuator Type Roller Plunger
	Product Type Limit Switch
	Contact Configuration 1 NO/1 NC
	IP Rating IP66, IP67
	Housing Material Plastic
	Contact Type Snap Action
	Terminal Type Cable
	Switching Current 0.75A
	Series XCMH
	Minimum Operating Temperature -25°C
	Switching AC Voltage 240V ac
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 70°C
	Length 16mm
	Width 30mm
	Standards/Approvals CSA C22.2 No 14, IEC 60204-1, IEC 60947-5-1, UL 508
	Depth 79mm
	Hazardous Area Certification No
	Mechanical Life 5000000Cycles
	Operating Force 12.5N

Datasheet - XCMH2121L1

COO (Country of Origin):: ID

Telemecanique Sensors XCMH Series Limit Switch, IP66/IP67 Ingress Protection, 5000000 Cycles Mechanical Life - XCMH2121L1

This limit switch is a compact industrial sensor designed to detect mechanical movement and provide rapid electrical switching in automated systems. It uses a roller plunger actuator for direct contact detection and is built with a polymer enclosure suited to demanding industrial environments. The unit connects via an attached cable and offers snap-action contact behaviour for immediate state changes.

Features and Benefits:

• Rated for 250V DC switching to suit high-voltage DC circuits
• Supports 240V AC operation for common AC control systems
• Single changeover contact for versatile control logic
• Snap-action contacts minimise bounce for accurate signalling
• Operating force of 12.5N enables consistent actuation response
• Endurance of 5,000,000 cycles reduces replacement frequency

Applications

• Used with conveyor edge detection in manufacturing lines
• Suitable for actuator position sensing in automation
• Ideal for door-travel monitoring in industrial enclosures
• Can be used for limit detection on packaging machinery
• Used for end-of-travel control on linear slides

What environmental protection does it provide for outdoor use?

The enclosure meets IP66 and IP67 ratings, offering protection against powerful water jets and temporary immersion.

How does the contact arrangement support control circuits?

It provides one normally open and one normally closed contact to enable both make-before-break and fail-safe wiring schemes.

What terminal style is supplied for installation?

A factory-fitted cable termination is provided to simplify wiring without separate terminal blocks.

What temperature range can the device operate within?

The unit functions reliably between -25°C and 70°C for varied ambient conditions.