SICK UP56 Series Ultrasonic Level Sensor Ultrasonic Level Sensor, Threaded, Vertical, NO-Rated, Fluorelastomer, Housing

모든 Level Sensors 열람하기

Subtotal (1 unit)*

₩1,468,330.50

Add to Basket
수량 선택 또는 입력
제조사가 재고 비축중
  • 2026년 6월 17일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩1,468,330.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
213-3372
제조사 부품 번호:
UP56-213128
제조업체:
SICK
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SICK

Product Type

Ultrasonic Level Sensor

Device Type

Ultrasonic Level Sensor

Mount Type

Threaded, Vertical

Housing Material

Stainless Steel

Minimum Operating Temperature

-25°C

Interface Type

M12

Maximum Operating Temperature

70°C

Maximum DC Voltage

30V dc

Maximum Current

200mA

Maximum Pressure

6bar

Gasket Material

Fluorelastomer

Standards/Approvals

CE Certified

Hazardous Area Certification

NO

Series

UP56

Overview


At a glance


Non-contact measurement up to 3.4 m operating distance / 8.0 m scanning distance limit

Pressure resistant up to 6 bar

Converter protected by PVDF cover for increased resistance

3-in-1: Continuous measurement, switching signal, and display

Analog output can be switched 4 mA ... 20 mA and 0 V ... 10 V

Process connector thread G 1 and G 2

IP67 enclosure rating

Simple operation, also via Connect+

Your Benefit


Non-contact measurement in pressurized containers – no wear over time

Easy to set parameters, saving time

Flexible measurement system for different container sizes – standardization and stock reduction

One product for point level and continuous applications, reduces the number of sensors required

The product family UP56 of ultrasonic level sensors is the ideal solution for demanding applications. The teflon-protected transducer handles overpressure up to 6 bar (87 psi) and is resistant against numerous difficult fluids. Wetted parts can be chosen either as stainless steel or PVDF, thus making the UP56 the perfect solution for measurement in aggressive, viscous, or abrasive liquids, or bulk solids. By combining two output signals in one device, new cost-effective solutions can be created for measurement and integration into the system. With two switching outputs, the UP56 can measure dry running and overflow in one device. Combining analog and a switching output enables continuous level measurement with a separate overflow signal. Parameters are easy to set via an integrated display, PC or the connect+ adapter.

Applications


Level measurement in the material container

Toner fill level measurement

Checking presence and fill level in the singulation system

Level measurement in the material container

Filling level measurement

Level measurement during material handling

Clogging in a compartment hopper

Dust silo filling level at a dust conveying system in the off-gas system

관련된 링크들