Flowline EchoSwitch Series Ultrasonic Level Switch Ultrasonic Level Sensor, Vertical, PC Body

Subtotal (1 unit)*

₩1,935,648.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 2월 23일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩1,935,648.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
124-0131
제조사 부품 번호:
LU74-5004
제조업체:
Flowline
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Flowline

Device Type

Ultrasonic Level Switch

Mounting Type

Vertical

Body Material

PC

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

+71°C

Maximum AC Voltage

250V

Maximum Current

20 mA

Maximum Pressure

2bar

Gasket Material

FKM

Series

EchoSwitch

Current Rating

2 A

COO (Country of Origin):
US

Flowline Ultrasonic Level Switch


The Flowline Ultrasonic level sensor provides continuous level detection up to 26.2ft (8m) with 3 programmable relays for level switch or level control functions and a 4mA to 20mA signal output. This sensor is programmed via the integral push button display module. Each relay can be configured on a single set point (high-level alarm or low-level alarm) or latched on two set points for automatic fill or empty in simplex (one pump or valve), duplex (two pumps) or triplex (three pumps) level control modes with selectable time delay and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids.

Note:

Compatible with Various Flowline product ranges such as DataLoop, DataView, DataPoint and Commander

Features and Benefits


Configuration is simple via an integral push button display module

Three programmable relays for switch, pump control and fail-safety

1 pump or valve with 2 alarms

2 pumps (lead-lag) with 1 alarms

2 pumps (duplexing) with 1 alarms

3 independent switch point alarms

LCD display indicates level height in engineering units and relay status

Narrow 2in or 3in beam width for applications with limited measurement space

Short 4in or 8in dead band maximizes the measurable filling capacity of the tank

PVDF transducer and NEMA 4X polycarbonate enclosure for corrosive liquids

Automatic temperature compensation for accurate measurement

Sensor range/size 5.5m (18.0ft)

Process mount: 2in NPT (2in G)

Maximum current of 20mA

Current rating of 2A

Applications


Tanks

Skids

IBC

Sumps and process tank level applications

Certifications


CE certified

ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007

관련된 링크들