Stanley Carbide Knife Blade, 50 x 19 x 42 mm 19 mm, 10 per Package
- RS 제품 번호:
- 537-641
- 제조사 부품 번호:
- 2-11-911
- 제조업체:
- Stanley
Subtotal (1 pack of 10 units)*
₩5,596.50
재고있음
- 150 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
팩 | 한팩당 | 한팩당* |
|---|---|---|
| 1 + | ₩5,596.50 | ₩559.65 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 537-641
- 제조사 부품 번호:
- 2-11-911
- 제조업체:
- Stanley
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Stanley | |
| Product Type | Knife Blade | |
| Blade Size | 50 x 19 x 42 mm | |
| Material | Carbide | |
| Heavy Duty | Yes | |
| Blade Type | Knife Blade | |
| Blade Width | 19mm | |
| Number of Pieces | 10 | |
| Blade Length | 50mm | |
| Blade Thickness | 0.43mm | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 Stanley | ||
Product Type Knife Blade | ||
Blade Size 50 x 19 x 42 mm | ||
Material Carbide | ||
Heavy Duty Yes | ||
Blade Type Knife Blade | ||
Blade Width 19mm | ||
Number of Pieces 10 | ||
Blade Length 50mm | ||
Blade Thickness 0.43mm | ||
Standards/Approvals No | ||
제외
- COO (Country of Origin):
- GB
Stanley Knife Blade, 50mm Blade Length, Carbide - 2-11-911
This knife blade is a replacement cutting element designed for heavy-duty utility use in industrial settings. It provides a hardened cutting edge suited to repetitive trimming and scoring tasks where consistent performance is required. Supplied in a multi-piece pack, it is intended for use by professionals working with precision assembly, installation and maintenance operations.
Features & Benefits
• Carbide composition offers extended wear life compared with steel
• Thin 0.43mm profile enables precise, low-resistance cuts
• Heavy-duty construction supports high-traffic usage environments
• 19mm cutting width provides stable guided cuts for narrow workpieces
• Thin 0.43mm profile enables precise, low-resistance cuts
• Heavy-duty construction supports high-traffic usage environments
• 19mm cutting width provides stable guided cuts for narrow workpieces
Applications
• Suitable for cable sleeving and insulation trimming in electrical work
• Ideal for panel preparation and small-part deburring in mechanical workshops
• used with utility knives for precision component trimming in electronics
• Can be used for vinyl and gasket cutting in automation assembly lines
• Ideal for panel preparation and small-part deburring in mechanical workshops
• used with utility knives for precision component trimming in electronics
• Can be used for vinyl and gasket cutting in automation assembly lines
How are replacement intervals determined for these blades?
Wear rate depends on substrate hardness and cutting frequency
monitor edge chipping and replace when cut quality degrades to maintain consistent tolerances.
What handling considerations apply when swapping blades?
Use appropriate blade-change tools or protective gloves to prevent contact with the carbide edge and ensure secure seating in the holder to avoid lateral play.
Are these blades compatible with standard utility knife holders?
They are intended for 50mm utility-type holders that accept snap-off or straight replacement blades with a 19mm usable cutting width.
How should used blades be disposed of in a workshop environment?
Place spent carbide blades in a designated sharps container or metal recycling box to prevent injury and enable material recovery.
관련된 링크들
- Stanley Carbide Knife Blade, 172 x 18 x 19 mm 19 mm, 10 per Package
- Stanley Knife Blade, 50 x 19 x 16.5 mm 19 mm, 5 per Package
- Stanley Knife Blade, 50 x 19 x 5.5 mm 20 mm, 100 per Package
- Stanley Carbide Knife Blade, 24 x 16 x 17.5 mm 19 mm, 50 per Package
- Stanley Tungsten Carbide Flat Safety Knife Blade, 50 per Package
- Stanley Carbide Knife Blade, 68 x 18 x 25 mm 0.5 mm, 10 per Package
- Stanley Carbide Knife Blade, 38.5 x 3.5 x 21.2 mm 3.5 mm, 400 per Package
- Stanley FatMax Flat Safety Knife Blade, 1992B 19 mm, 100 per Package