RS PRO 4-Pole Panel Mount Isolator Switch -, IP54, 100A, 55 kW
- RS 제품 번호:
- 773-8049
- 제조업체:
- RS PRO
Subtotal (1 unit)*
₩150,580.00
재고있음
- 추가로 2026년 8월 24일 부터 28 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩150,580.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 773-8049
- 제조업체:
- RS PRO
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | RS PRO | |
| Number of Poles | 4 | |
| Product Type | Isolator Switch | |
| Mount Type | Panel Mount | |
| IP Rating | IP54 | |
| Electrical Phase | 3 | |
| Handle Colour | Red | |
| Switching Current | 100A | |
| Series | LB | |
| Auxiliary Contacts Available | Yes | |
| Minimum Operating Temperature | -25°C | |
| Switching Power | 55kW | |
| Padlock Compatibility | Yes | |
| Switching AC Voltage | 690V ac | |
| Maximum Operating Temperature | 80°C | |
| Depth | 125mm | |
| Width | 215mm | |
| Standards/Approvals | EN, RoHS | |
| Length | 270mm | |
| Hazardous Area Certification | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 RS PRO | ||
Number of Poles 4 | ||
Product Type Isolator Switch | ||
Mount Type Panel Mount | ||
IP Rating IP54 | ||
Electrical Phase 3 | ||
Handle Colour Red | ||
Switching Current 100A | ||
Series LB | ||
Auxiliary Contacts Available Yes | ||
Minimum Operating Temperature -25°C | ||
Switching Power 55kW | ||
Padlock Compatibility Yes | ||
Switching AC Voltage 690V ac | ||
Maximum Operating Temperature 80°C | ||
Depth 125mm | ||
Width 215mm | ||
Standards/Approvals EN, RoHS | ||
Length 270mm | ||
Hazardous Area Certification No | ||
- COO (Country of Origin):
- IN
RS PRO 4 Pole Panel Mount Non Fused Isolator Switch - 100 A Maximum Current, 55 kW Power Rating, IP54
When you need to work on an electrical circuit safely, you can use an isolation switch to separate it from the main source of power. This non-fused isolator switch from RS PRO will power down or isolate part of a circuit whenever you need to carry out maintenance on it.
As this is a non-fused device, you disconnect using a knife-blade or rotary function so it can be reset without replacing a fuse. It will operate at temperatures from -25°C to +80°C and can be used in a wide range of applications.
The switch conforms to ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 standards and won't damage your equipment through electrostatic discharge. It is dust resistant and can withstand water spray. You'll find these switches used in low voltage switchgear such as power distribution, load isolation and motor start/stop.
Features and Benefits
• Panel mounting
• Maximum current of 100 A
• Power rating of 55 kW
• Voltage rating of 690 V AC
• Switch rating of 30 kA
• Operating temperature range of -25°C to +80°C
• Some dust resistance and spray-resistant (IP54 Rating)
• Red handle colour
• Accepts padlocks
• Length of 270 mm
• Depth of 125 mm
• Auxiliary contacts available
• Three phases
• Four poles
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
관련된 링크들
- RS PRO 3-Pole Panel Mount Isolator Switch -, IP65, 100A, 55 kW
- Eaton 3-Pole Rear Panel Isolator Switch -, IP65, 100A, 55 kW
- RS PRO 4-Pole Panel Mount Isolator Switch -, IP54, 40A, 37 kW
- RS PRO 4-Pole Panel Mount Isolator Switch -, IP54, 80A, 37 kW
- RS PRO 4-Pole Panel Mount Isolator Switch -, IP54, 125A, 75 kW
- RS PRO 3-Pole Panel Mount Isolator Switch -, IP54, 32A, 15 kW
- RS PRO 4-Pole Panel Mount Isolator Switch -, IP54, 25A, 11 kW
- RS PRO 3-Pole Panel Mount Isolator Switch -, IP54, 80A, 37 kW
