Eaton 1-Pole Screw Isolator Switch -, IP65, 100A, 30 kW

모든 Isolator Switches 열람하기

Subtotal (1 unit)*

₩409,082.70

Add to Basket
수량 선택 또는 입력
제조사가 재고 비축중
  • 2026년 7월 14일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩409,082.70

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
431-6444
제조사 부품 번호:
207275 T5-1-8200/I5/SVB
제조업체:
Eaton
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Eaton

Product Type

Isolator Switch

Number of Poles

1

Mount Type

Screw

IP Rating

IP65

Electrical Phase

1

Handle Colour

Red

Switching Current

100A

Series

T51

Terminal Type

Screw

Auxiliary Contacts Available

Yes

Minimum Operating Temperature

-25°C

Switching DC Voltage

60V dc

Padlock Compatibility

Yes

Switching AC Voltage

400V ac

Switching Power

30kW

Maximum Operating Temperature

50°C

Width

200mm

Depth

125mm

Length

280mm

Hazardous Area Certification

ATEX

Standards/Approvals

UL, IEC, EN, CSA, ATEX

Eaton Enclosed Isolator Switch


Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits


• The perfect solution for installing as a safety measure

• Used as an emergency switching off/emergency stop device

• The basic functions: used as a main switch, maintenance switch or manual override switch

• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions

• Built-in earth commoning block

• Lockable in the 0/OFF position, with up to three padlocks

• Totally insulated

• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish

What is the difference between a fused switch disconnector and a non-fused switch disconnector?


Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Note

Switch power/capacity refers to AC23A use at 380-440V

관련된 링크들