Eaton 1-Pole Surface Isolator Switch -, IP65, 520A, 22 kW

모든 Isolator Switches 열람하기

Subtotal (1 unit)*

₩202,254.00

Add to Basket
수량 선택 또는 입력
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량
한팩당
1 +₩202,254.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
393-9715
제조사 부품 번호:
207240 T5B-1-8200/I4/SVB
제조업체:
Eaton
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Eaton

Number of Poles

1

Product Type

Isolator Switch

Mount Type

Surface

IP Rating

IP65

Electrical Phase

1

Handle Colour

Red

Auxiliary Contacts Available

Yes

Terminal Type

Screw

Series

T5B

Switching Current

520A

Switching Power

22kW

Switching DC Voltage

60V dc

Switching AC Voltage

230V ac

Minimum Operating Temperature

-25°C

Padlock Compatibility

No

Maximum Operating Temperature

50°C

Width

160mm

Standards/Approvals

CSA, IEC, UL

Hazardous Area Certification

No

Depth

125mm

Length

240mm

제외

COO (Country of Origin):
GB

Eaton Enclosed Isolator Switch


Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits


• The perfect solution for installing as a safety measure

• Used as an emergency switching off/emergency stop device

• The basic functions: used as a main switch, maintenance switch or manual override switch

• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions

• Built-in earth commoning block

• Lockable in the 0/OFF position, with up to three padlocks

• Totally insulated

• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish

What is the difference between a fused switch disconnector and a non-fused switch disconnector?


Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Note

Switch power/capacity refers to AC23A use at 380-440V

관련된 링크들